ModEleSys V1 backplane
About the ModEleSys V1 backplane PCB
ModEleSys V1 backplane is an open source PCB design by Squantor, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 98 mm, with 49 components from 12 distinct parts.
By type, the board carries 24 connectors, 12 resistors, 4 switches, 4 LEDs and 4 capacitors.
From the project
Kicad templates that I use regularly
ModEleSys V1 backplane bill of materials (BOM)
49 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | Proto | 4by4cm_module | J1, J2, J3, J4 |
| 1 | module_2x15_left_output | module_2x15_left | J5 |
| 3 | module_2x15_left_input | module_2x15_left | J6, J7, J8 |
| 1 | module_2x15_right_output | module_2x15_right | J9 |
| 3 | module_2x15_right_input | module_2x15_right | J10, J11, J12 |
| 12 | Conn_01x03 | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J13, J14, J15, J16, J17, J18, J19, J20 +4 |
| 1 | V:20230418 | Label_Generic | N2 |
| 4 | switch_DPDT | PS-22F02 | SW1, SW2, SW3, SW4 |
| 4 | LED_Dual_CC | LED_DUAL_TH245_90deg | LED1, LED2, LED3, LED4 |
| 4 | 10n | C_0805+0603 | C1, C2, C3, C4 |
| 4 | 1K | R_0805+0603 | R1, R2, R3, R4 |
| 8 | R | R_0603_hand | R5, R6, R7, R8, R9, R10, R11, R12 |
ModEleSys V1 backplane design files
The KiCad project lives in the Squantor/templates_kicad repository on GitHub; these links point at the commit this page was built from.
ModEleSys V1 backplane: common questions
How big is the ModEleSys V1 backplane PCB?
The ModEleSys V1 backplane measures 90 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ModEleSys V1 backplane?
49 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the ModEleSys V1 backplane design files?
From the Squantor/templates_kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ModEleSys V1 backplane design in my own project?
Yes, under the terms of its MIT license, which Squantor chose for the repository.
More boards in templates_kicad
Nuclone expansion small UART+proto
50 × 50 mm49 parts2LMIT24
Nuclone devboard medium 2 layer USB-C UART
50 × 76.2 mm45 parts2LMIT24
Nuclone devboard small 4 layer
50 × 50 mm37 parts4LMIT24
Alu box 10x10cm minimal
90 × 98 mm37 parts2LMIT24
Nuclone devboard small 2 layer USB-C data
50 × 50 mm36 parts2LMIT24
Nuclone devboard medium 2 layer USB-C data
50 × 76.2 mm35 parts2LMIT24
Nuclone devboard medium 2 layer USB-C PD
50 × 76.2 mm34 parts2LMIT24
Nuclone devboard small 2 layer USB-C PD
50 × 50 mm34 parts2LMIT24
ModEleSys V2 backplane
90 × 98 mm31 parts2LMIT24
Hammond 1551G OSH4L devboard
44 × 29 mm3 parts2LMIT24