Nuclone devboard medium 2 layer USB-C PD
About the Nuclone devboard medium 2 layer USB-C PD PCB
Nuclone devboard medium 2 layer USB-C PD is an open source PCB design by Squantor, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 76.2 mm, with 34 components from 24 distinct parts.
Other key parts include the MCP1702-3.3V. By type, the board carries 11 resistors, 7 capacitors, 5 connectors, 2 switches, 2 diodes and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Kicad templates that I use regularly
Main components on the Nuclone devboard medium 2 layer USB-C PD
Nuclone devboard medium 2 layer USB-C PD bill of materials (BOM)
34 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1702-3.3V | SOT89-NXP | U1 |
| 1 | JTAG_2X05 | Header-0127-2X05-H006 | J1 |
| 1 | TYPE-C-31-M-12 | USB-C-HRO-31-M-17_aisler | J2 |
| 1 | nuclone_medium_left | nuclone_medium_left_stacked | J3 |
| 1 | nuclone_medium_right | nuclone_medium_right_stacked | J4 |
| 1 | Conn_02x06_Odd_Even | Header-0127-2X04-H006 | J5 |
| 1 | 0.5A | F_0603_hand | F1 |
| 1 | V20240606 | Label_Generic | N2 |
| 1 | JLCJLCJLCJLC | Label_Generic | N3 |
| 1 | NuClone Medium template V1.5.1 | Label_Generic | N4 |
| 1 | Nuclone Template V20240606 | Label_Generic | N5 |
| 1 | RESET | TD-85XU | SW1 |
| 1 | Bootloader | TD-85XU | SW2 |
| 1 | B5819WS | SOD-323-nexperia-hand | D1 |
| 1 | GREEN | LED_0603_hand | D2 |
| 1 | 600 | L_0603 | FB1 |
| 3 | 10u | C_0603 | C1, C2, C3 |
| 2 | 100n | C_0603 | C5, C14 |
| 2 | 1u | C_0603 | C6, C17 |
| 2 | 5.1K | R_0603_hand | R1, R7 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 47K | R_0603_hand | R2, R3, R4, R5, R6 |
| 1 | 10K | R_0603_hand | R8 |
| 2 | 470 | R_0603_hand | R9, R13 |
| 1 | 1K | R_0603_hand | R14 |
Nuclone devboard medium 2 layer USB-C PD design files
The KiCad project lives in the Squantor/templates_kicad repository on GitHub; these links point at the commit this page was built from.
Nuclone devboard medium 2 layer USB-C PD: common questions
How big is the Nuclone devboard medium 2 layer USB-C PD PCB?
The Nuclone devboard medium 2 layer USB-C PD measures 50 × 76.2 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Nuclone devboard medium 2 layer USB-C PD?
34 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nuclone devboard medium 2 layer USB-C PD design files?
From the Squantor/templates_kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nuclone devboard medium 2 layer USB-C PD design in my own project?
Yes, under the terms of its MIT license, which Squantor chose for the repository.
More boards in templates_kicad
ModEleSys V1 backplane
90 × 98 mm49 parts2LMIT24
Nuclone expansion small UART+proto
50 × 50 mm49 parts2LMIT24
Nuclone devboard medium 2 layer USB-C UART
50 × 76.2 mm45 parts2LMIT24
Nuclone devboard small 4 layer
50 × 50 mm37 parts4LMIT24
Alu box 10x10cm minimal
90 × 98 mm37 parts2LMIT24
Nuclone devboard small 2 layer USB-C data
50 × 50 mm36 parts2LMIT24
Nuclone devboard medium 2 layer USB-C data
50 × 76.2 mm35 parts2LMIT24
Nuclone devboard small 2 layer USB-C PD
50 × 50 mm34 parts2LMIT24
ModEleSys V2 backplane
90 × 98 mm31 parts2LMIT24
Hammond 1551G OSH4L devboard
44 × 29 mm3 parts2LMIT24
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979