AC to DC Convertor
About the AC to DC Convertor PCB
AC to DC Convertor is an open source PCB design by SREE-VISHNU-N, published on GitHub. It is a 4-layer board measuring 34 × 27.5 mm, with 7 components from 4 distinct parts.
By type, the board carries 4 diodes, 2 resistors and 1 capacitor.
AC to DC Convertor bill of materials (BOM)
7 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | IN4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 1 | 0.1UF 1000uf | C_Radial_D8.0mm_H11.5mm_P3.50mm | C1 |
| 1 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
AC to DC Convertor design files
The KiCad project lives in the SREE-VISHNU-N/PCB_DESIGN repository on GitHub; these links point at the commit this page was built from.
AC to DC Convertor: common questions
How big is the AC to DC Convertor PCB?
The AC to DC Convertor measures 34 × 27.5 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the AC to DC Convertor?
7 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AC to DC Convertor design files?
From the SREE-VISHNU-N/PCB_DESIGN repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AC to DC Convertor design in my own project?
The repository has no license, so all rights stay with SREE-VISHNU-N. Use it as a reference, and ask the author before reusing the design.
More boards in PCB_DESIGN
ESP32Air Quality Monitering System
72.3 × 33.7 mm54 parts4LNo license0
ESP32Arduino Nano
43.2 × 17.8 mm33 parts4LNo license0
ESP32STM32 Hardware
41 × 31 mm24 parts2LNo license0
ESP32ESP32
25.9 × 64.3 mm16 parts4LNo license0
ESP32Excersice project
73 × 50 mm10 parts4LNo license0