HardLabs

Excersice project

SREE-VISHNU-N·PCB_DESIGN·Pulse Oximeter PCB/Project Pulse Oximeter/Excersice project.kicad_pcb

Excersice project PCB layout, top view — open source ESP32 board by SREE-VISHNU-N

About the Excersice project PCB

Excersice project is an open source ESP32 PCB design by SREE-VISHNU-N, published on GitHub. It is a 4-layer board measuring 73 × 50 mm, with 10 components from 9 distinct parts.

Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the D3V3XA4B10LP and Arduino_Nano_v3.x. By type, the board carries 4 resistors, 3 capacitors, 2 ICs and 1 module.

Main components on the Excersice project

ESP32-S3-MINI-1-N8D3V3XA4B10LPArduino_Nano_v3.x

Excersice project bill of materials (BOM)

10 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-MINI-1-N8
MAX30102
U1
1
D3V3XA4B10LP
SSD 1306
U2
1
Arduino_Nano_v3.x
A1
2
0.1UF
100n
C1, C3
1
10UF
100n
C2
1
10K
1K
R1
1
1K
R2
1
5.1K
1K
R3
1
200K
1K
R4

Excersice project design files

The KiCad project lives in the SREE-VISHNU-N/PCB_DESIGN repository on GitHub; these links point at the commit this page was built from.

Excersice project: common questions

What microcontroller does the Excersice project use?

The Excersice project is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.

How big is the Excersice project PCB?

The Excersice project measures 73 × 50 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the Excersice project?

10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Excersice project design files?

From the SREE-VISHNU-N/PCB_DESIGN repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Excersice project design in my own project?

The repository has no license, so all rights stay with SREE-VISHNU-N. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Excersice project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PCB_DESIGN

Similar boards