SwitchTester
ssaunter·SwitchTester·pcb/SwitchTester.kicad_pcb
About the SwitchTester PCB
SwitchTester is an open source PCB design by ssaunter, published on GitHub. It is a 2-layer board measuring 122.5 × 26.4 mm, with 18 components from 6 distinct parts.
Other key parts include the MOUDLE-SEEEDUINO-XIAO. By type, the board carries 6 switches, 5 diodes, 5 capacitors, 1 IC and 1 resistor.
It belongs with the keyboards designs in this gallery.
From the project
A 5-key switch PCB and housing to test the feel of different Cherry MX switches. Addressable LEDs have two modes: always on (colored), and fade when pressed.
SwitchTester is a 5-key switch PCB and housing to test the feel of different Cherry MX switches. Addressable LEDs have two modes: always on (colored), and fade when pressed.
The PCB follows a similar architecture to the Hackpad, and upgrades with decoupling capacitors and a switch to control LED modes. The code is set up to adjust the LED modes depending on the slide switch mode.

Main components on the SwitchTester
SwitchTester bill of materials (BOM)
18 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOUDLE-SEEEDUINO-XIAO | XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 5 | SW_Push_45deg | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5 |
| 1 | SW_Wuerth_450301014042 | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW6 |
| 5 | SK6812MINI-E | SK6812MINI-E_fixed | D1, D2, D3, D4, D5 |
| 5 | 0.1 μF | C_0603_1608Metric | C1, C2, C3, C4, C5 |
| 1 | 330 | R_0603_1608Metric | R1 |
SwitchTester design files
The KiCad project lives in the ssaunter/SwitchTester repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/SwitchTester.kicad_pcb
- Schematicpcb/SwitchTester.kicad_sch
- BOMbom.csv
SwitchTester: common questions
How big is the SwitchTester PCB?
The SwitchTester measures 122.5 × 26.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SwitchTester?
18 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SwitchTester design files?
From the ssaunter/SwitchTester repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SwitchTester design in my own project?
The repository has no license, so all rights stay with ssaunter. Use it as a reference, and ask the author before reusing the design.