Inteli210AT
About the Inteli210AT PCB
Inteli210AT is an open source PCB design by ssmiao, published on GitHub under the MIT license. It is a 4-layer board measuring 64 × 55.5 mm, with 50 components from 16 distinct parts.
Other key parts include the I210 and W25Q16. By type, the board carries 26 resistors, 20 capacitors, 2 ICs, 1 crystal and 1 connector.
From the project
A standrad PCIe x1 Ethernet Card Using Intel i210 chipset
Before you make it and want to use in your computer, remember to go to DOS system and flash config file to the card. The following steps maybe help.
2. Use Rufus to create a FreeDOS USB disk (RuFus support itself, you don't need to download a ISO file or something). 3. Copy my folder to the disk. 4. Shutdown the computer and insert the network card 5. Start the computer into FreeDOS system. 6. Go to /FARTHING and run AUTO.BAT
Main components on the Inteli210AT
Inteli210AT bill of materials (BOM)
50 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | I210 i210 | QFN50P900X900X100-65N | U2 |
| 1 | W25Q16 | SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | 25MHZ 25MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | HR911130C | HANRUN_HR911130C | J1 |
| 13 | 100NF 100nF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +5 |
| 1 | 39NF 39nF | C_0603_1608Metric | C14 |
| 2 | 27PF 27pF | C_0603_1608Metric | C15, C16 |
| 2 | 15UF 15uF | C_0603_1608Metric | C17, C18 |
| 2 | 100nF | C_0603_1608Metric | C19, C20 |
| 4 | 3.3K | R_0603_1608Metric | R1, R5, R15, R16 |
| 9 | 10K 10k | R_0603_1608Metric | R2, R3, R4, R6, R7, R8, R9, R12 +1 |
| 4 | NULL | R_0603_1608Metric | R10, R11, R13, R14 |
| 1 | 4.99k 1% | R_0603_1608Metric | R18 |
| 4 | 160R | R_0603_1608Metric | R19, R20, R21, R22 |
| 3 | 5k | R_0603_1608Metric | R23, R24, R25 |
| 1 | 10k | R_0603_1608Metric | R26 |
Inteli210AT design files
The KiCad project lives in the ssmiao/Intel-I210-network-card repository on GitHub; these links point at the commit this page was built from.
Inteli210AT: common questions
How big is the Inteli210AT PCB?
The Inteli210AT measures 64 × 55.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Inteli210AT?
50 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Inteli210AT design files?
From the ssmiao/Intel-I210-network-card repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Inteli210AT design in my own project?
Yes, under the terms of its MIT license, which ssmiao chose for the repository.
