V1
About the V1 PCB
V1 is an open source PCB design by ssmiao, published on GitHub under the MIT license. It is a 2-layer board measuring 112.1 × 82.8 mm, with 9 components from 7 distinct parts.
Other key parts include the DM02. By type, the board carries 4 capacitors, 3 connectors, 1 IC and 1 test point.
From the project
A standrad PCIe x1 Ethernet Card Using Intel i210 chipset
Main components on the V1
V1 bill of materials (BOM)
9 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DM02 | DM02 | U1 |
| 1 | PCIE-X1 Conn_02x40_Top_Bottom | OCP_Mezz_V2.0 | J2 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3, J4 |
| 1 | TestPoint_2Pole | TestPlot | TP1 |
| 1 | 100NF C | CP_Elec_6.3x5.4 | C1 |
| 1 | 100NF C | CP_EIA-7343-31_Kemet-D | C2 |
| 2 | 100NF C | C_1206_3216Metric | C3, C4 |
V1 design files
The KiCad project lives in the ssmiao/Intel-I210-network-card repository on GitHub; these links point at the commit this page was built from.
V1: common questions
How big is the V1 PCB?
The V1 measures 112.1 × 82.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the V1?
9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the V1 design files?
From the ssmiao/Intel-I210-network-card repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the V1 design in my own project?
Yes, under the terms of its MIT license, which ssmiao chose for the repository.
