MAIN POWER
ssmo-oss·UMI-Power-distribution·design/D6/MAIN_POWER/MAIN_POWER.kicad_pcb
About the MAIN POWER PCB
MAIN POWER is an open source PCB design by ssmo-oss, published on GitHub. It is a 4-layer board measuring 68 × 100.3 mm, with 11 components from 10 distinct parts.
By type, the board carries 6 connectors and 5 fuses.
From the project
D6 retains the three-board architecture and resolves the known part-sourcing and file-format issues that can be handled before fabrication. Ready for prototype manufacturing review, not physically qualified for production.
D6 retains the three-board architecture and resolves the known part-sourcing and file-format issues that can be handled before fabrication. Ready for prototype manufacturing review, not physically qualified for production.
- Replaced the preorder snubber resistor with stocked Yageo RC2010JK-077R5L / C4169838. Resistance, tolerance, power rating and footprint are unchanged. Its pulse/thermal behaviour still requires the same prototype measurement as the original part. - Found exact loose-part sources for all thirteen manual component types. The Phoenix input connector no longer needs JLC…
MAIN POWER bill of materials (BOM)
11 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1709681 12V PSU INPUT | Phoenix_1709681 | J1 |
| 1 | B2P-VH(LF)(SN) JETSON 12V 5A | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J2 |
| 1 | B2P-VH(LF)(SN) GMSL 12V / EXCLUSIVE WITH POE | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J3 |
| 1 | B2P-VH(LF)(SN) FAN 12V 0.14A | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J4 |
| 1 | B2P-VH(LF)(SN) USB BOARD 12V | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J5 |
| 1 | B2P-VH(LF)(SN) POE BOARD 12V INPUT | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J6 |
| 2 | 178.6165.0002 7.5A FUSE HOLDER | FuseHolder_Blade_ATO_Littelfuse_FLR_178.6165 | F1, F2 |
| 1 | 178.6165.0002 1A FUSE HOLDER | FuseHolder_Blade_ATO_Littelfuse_FLR_178.6165 | F3 |
| 1 | 178.6165.0002 5A FUSE HOLDER | FuseHolder_Blade_ATO_Littelfuse_FLR_178.6165 | F4 |
| 1 | 178.6165.0002 10A POE CABLE FUSE HOLDER | FuseHolder_Blade_ATO_Littelfuse_FLR_178.6165 | F5 |
MAIN POWER design files
The KiCad project lives in the ssmo-oss/UMI-Power-distribution repository on GitHub; these links point at the commit this page was built from.
MAIN POWER: common questions
How big is the MAIN POWER PCB?
The MAIN POWER measures 68 × 100.3 mm, has 4 copper layers and is 1.2 mm thick.
How many components are on the MAIN POWER?
11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MAIN POWER design files?
From the ssmo-oss/UMI-Power-distribution repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MAIN POWER design in my own project?
The repository has no license, so all rights stay with ssmo-oss. Use it as a reference, and ask the author before reusing the design.
More boards in UMI-Power-distribution
UMI PoE power converter
ssmo-oss
106 × 100 mm56 parts4LNo license0USB POWER
ssmo-oss
80 × 50 mm34 parts4LNo license0MAIN POWER before outline v2 1
ssmo-oss
121.8 × 60.5 mm11 parts2LNo license0MAIN POWER pre reroute
ssmo-oss
121.8 × 60.5 mm11 parts2LNo license0MAIN POWER before bottom fuses
ssmo-oss
121.8 × 60.5 mm11 parts2LNo license0MAIN POWER before STEP volume models
ssmo-oss
121.8 × 60.5 mm11 parts2LNo license0