USB POWER

ssmo-oss·UMI-Power-distribution·design/D6/USB_POWER/USB_POWER.kicad_pcb

USB POWER PCB layout, top view — open source board by ssmo-oss

About the USB POWER PCB

USB POWER is an open source PCB design by ssmo-oss, published on GitHub. It is a 4-layer board measuring 80 × 50 mm, with 34 components from 20 distinct parts.

Other key parts include the TPSM63610RDFR, TPS2557DRBR, TPS2513ADBVR and USBLC6-2SC6. By type, the board carries 14 capacitors, 9 resistors, 6 ICs, 3 connectors, 1 transistor and 1 diode.

From the project

D6 retains the three-board architecture and resolves the known part-sourcing and file-format issues that can be handled before fabrication. Ready for prototype manufacturing review, not physically qualified for production.

D6 retains the three-board architecture and resolves the known part-sourcing and file-format issues that can be handled before fabrication. Ready for prototype manufacturing review, not physically qualified for production.

- Replaced the preorder snubber resistor with stocked Yageo RC2010JK-077R5L / C4169838. Resistance, tolerance, power rating and footprint are unchanged. Its pulse/thermal behaviour still requires the same prototype measurement as the original part. - Found exact loose-part sources for all thirteen manual component types. The Phoenix input connector no longer needs JLC…

Main components on the USB POWER

USB POWER bill of materials (BOM)

34 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPSM63610RDFR
Texas Instruments
U1
2
TPS2557DRBR
TPS2557DRB
Texas Instruments
U2, U3
1
TPS2513ADBVR
Texas Instruments
U4
2
USBLC6-2SC6
STMicroelectronics
U5, U6
1
AO4407A
Alpha & Omega Semiconductor
Q1
1
B2P-VH(LF)(SN)
12V INPUT
J1
2
614004190021
USB-A 3A
J2, J3
1
BZT52C12-7-F
12V gate clamp
Diodes Incorporated
D1
1
CNA6P1X7R1H106KT000A
10uF 50V X7R
TDK
C1
1
CNA6P1X7R1H106KT000A
10uF 50V X7R
TDK
C2
1
GRM32ER71A476ME15L
47uF 10V X7R
Murata
C3
4
GRM188R71E104KA01D
100nF 25V
Murata
C4, C5, C8, C11
2
GRM31CR71A226KE15L
22uF 10V
Murata
C6, C7
4
GRM32ER71A476ME15L
47uF 10V X7R
Murata
C9, C10, C13, C14
1
EEE-FK1E470P
47uF 25V bulk
Panasonic
C12
1
RT0603BRD0724K9L
24.9k 0.1%
Yageo
R1
2
RT0603BRD0732K4L
32.4k 0.1%
Yageo
R2, R3
4
RC0603FR-07100KL
100k
Yageo
R4, R5, R6, R9
1
RT0603BRD07102KL
102k 0.1%
Yageo
R7
1
ERJ-3EKF1582V
15.8k 1%
Panasonic
R8

USB POWER design files

The KiCad project lives in the ssmo-oss/UMI-Power-distribution repository on GitHub; these links point at the commit this page was built from.

USB POWER: common questions

How big is the USB POWER PCB?

The USB POWER measures 80 × 50 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the USB POWER?

34 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the USB POWER design files?

From the ssmo-oss/UMI-Power-distribution repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the USB POWER design in my own project?

The repository has no license, so all rights stay with ssmo-oss. Use it as a reference, and ask the author before reusing the design.

More boards in UMI-Power-distribution