Button board
ssosik·button-mash·hardware/button-board/button-board/button-board.kicad_pcb
About the Button board
Button board is an open source PCB design by ssosik, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 85 × 56 mm, with 15 components from 5 distinct parts.
By type, the board carries 14 connectors and 1 capacitor.
From the project
Project files for a two-player whack-a-mole / button mash game
Twelve connectors, three power nets, one daisy chain. The stripboard version is documented in the wiring reference — 63 cuts and 31 hand-soldered wires. This directory is the PCB alternative.
Connections are made with net labels on pin stubs rather than drawn wires. For twelve connectors and three buses that is the clearer drawing, and it removes the class of bug where a generated wire lands a fraction off a pin and silently connects nothing.
Button board bill of materials (BOM)
15 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | B6B-XH-A | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 +2 |
| 2 | B2B-XH-A | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11, J12 |
| 1 | 1x14 | JST_XH_B14B-XH-A_1x14_P2.50mm_Vertical | J13 |
| 1 | MX126-5.0-02P | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J14 |
| 1 | 1000uF/16V | CP_Radial_D10.0mm_P5.00mm | C1 |
Button board design files
The KiCad project lives in the ssosik/button-mash repository on GitHub; these links point at the commit this page was built from.
Button board: common questions
How big is the Button board?
The Button board measures 85 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Button board?
15 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Button board design files?
From the ssosik/button-mash repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Button board design in my own project?
Yes, under the terms of its GPL-3.0 license, which ssosik chose for the repository.