Controller board

ssosik·button-mash·hardware/controller-board/controller-board/controller-board.kicad_pcb

Controller board layout, top view — open source NXP board by ssosik

About the Controller board

Controller board is an open source NXP PCB design by ssosik, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 64 × 76 mm, with 7 components from 7 distinct parts.

Its main chip is the Teensy 4.1, from the NXP family. Other key parts include the 74AHCT125. By type, the board carries 3 connectors, 2 ICs and 2 capacitors.

From the project

Project files for a two-player whack-a-mole / button mash game

The controller stripboard from the wiring reference — 33 cuts and nine jumpers around a socketed Teensy 4.1 — as a two-layer PCB. Same parts, same connectors, same pinout: the harness to the button board, the serial cable to the Matrix Portal and the 5 V lead from the star all plug into it unchanged.

gen-pcb.py has to run under the Python inside KiCad, the only one that can import pcbnew; the Makefile knows where it is. Unlike the button board, nothing here is laid out by hand, so regenerating is always safe: edit the generator, never the board.

Controller board, from the project README
From the project README

Main components on the Controller board

Controller board bill of materials (BOM)

7 components, 7 distinct parts.

QtyPartRefs
1
Teensy 4.1
U1
1
74AHCT125
U2
1
1x14
J1
1
B3B-XH-A
J2
1
MX126-5.0-02P
J3
1
100uF/16V
C1
1
100nF
C2

Controller board design files

The KiCad project lives in the ssosik/button-mash repository on GitHub; these links point at the commit this page was built from.

Controller board: common questions

What microcontroller does the Controller board use?

The Controller board is built around the Teensy 4.1, from the NXP family.

How big is the Controller board?

The Controller board measures 64 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Controller board?

7 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Controller board design files?

From the ssosik/button-mash repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Controller board design in my own project?

Yes, under the terms of its GPL-3.0 license, which ssosik chose for the repository.

Can I test firmware for the Controller board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in button-mash

Similar boards