DroidRadio
StayAlone01·DroidRadio·PCB/Transmitter.kicad_sch
About the DroidRadio PCB
DroidRadio is an open source PCB design by StayAlone01, published on GitHub under the Apache-2.0 license. It is a board, with 60 components from 31 distinct parts.
Other key parts include the LTC5599IUF, ADF4351, HMC849A, TMP411 and DAC5652IPFB. By type, the board carries 37 capacitors, 10 resistors, 6 ICs, 3 inductors, 1 crystal and 1 transformer.
Main components on the DroidRadio
DroidRadio bill of materials (BOM)
60 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC5599IUF | QFN-24_UF_LIT | U1 |
| 1 | ADF4351 | LFCSP-32-1EP_5x5mm_P0.5mm_EP3.25x3.25mm | U2 |
| 2 | HMC849A | QFN-24-1EP_4x4mm_P0.5mm_EP2.65x2.65mm_ThermalVias | U3, U4 |
| 1 | TMP411 | U6 | |
| 1 | DAC5652IPFB | TQFP-48_7x7mm_P0.5mm | U7 |
| 1 | TG2016SMN-26Mhz-MCGNNM | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | LFCN-1400 | Filter_Mini-Circuits_FV1206 | FL1 |
| 1 | LFCN-2000 | Filter_Mini-Circuits_FV1206 | FL2 |
| 1 | MABA-007159 | MABA-007159-000000_MCM | T1 |
| 1 | 39nH | L1 | |
| 2 | 1.5uH | L2, L3 | |
| 1 | 15pF | C1 | |
| 4 | 2.2pF | C2, C3, C4, C5 | |
| 21 | 0.1uF | C6, C9, C11, C12, C13, C14, C15, C16 +13 | |
| 2 | 10nF | C7, C8 | |
| 3 | 10pF | C10, C23, C25 | |
| 1 | 3nF | C17 | |
| 1 | 30pF | C18 | |
| 1 | 39nF | C19 | |
| 1 | 1.2nF | C20 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 180pF | C21 | |
| 1 | 2.2nF | C27 | |
| 1 | 1k | R1 | |
| 1 | 5.1k | R2 | |
| 1 | 216 | R3 | |
| 1 | 19.1k | R4 | |
| 1 | 442 | R5 | |
| 1 | 26.1k | R6 | |
| 1 | 25.1k | R7 | |
| 1 | 23.1k | R8 | |
| 2 | 2.2k | R9, R10 |
DroidRadio design files
The KiCad project lives in the StayAlone01/DroidRadio repository on GitHub; these links point at the commit this page was built from.
- SchematicPCB/Transmitter.kicad_sch
DroidRadio: common questions
How many components are on the DroidRadio?
60 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the DroidRadio design files?
From the StayAlone01/DroidRadio repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the DroidRadio design in my own project?
Yes, under the terms of its Apache-2.0 license, which StayAlone01 chose for the repository.