F103C8T6-KBRD

Stegogo·F103C8T6-KBRD·HARDWARE_KEYBOARD/kbrd.kicad_pcb

F103C8T6-KBRD PCB layout, top view — open source STM32 board by Stegogo

About the F103C8T6-KBRD PCB

F103C8T6-KBRD is an open source STM32 PCB design by Stegogo, published on GitHub. It is a 2-layer board measuring 65 × 46.5 mm, with 24 components from 12 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AP2210N-3.3TRG1. By type, the board carries 7 capacitors, 5 diodes, 4 switches, 3 resistors, 2 ICs and 2 connectors.

It belongs with the keyboards designs in this gallery.

From the project

STM32-based 4-key mini-keyboard I am making just for fun :D

4-key arrow keyoard from scratch, based on STM32F103C8T6. Work in progress.

F103C8T6-KBRD, from the project README
From the project README

Main components on the F103C8T6-KBRD

F103C8T6-KBRD bill of materials (BOM)

24 components, 12 distinct parts.

QtyPartRefs
1
STM32F103C8Tx
U1
1
AP2210N-3.3TRG1
U2
1
Crystal_GND24
Y1
1
USB_C_Receptacle_USB2.0_16P
J1
1
SWD
J2
4
SW_SPST
SW1, SW2, SW3, SW4
5
D
D1, D2, D3, D4, D5
2
10pF
C1, C2
3
100nF
C3, C4, C5
2
1.0uF
C6, C7
2
5.1kΩ
R1, R2
1
1.5kΩ
R3

F103C8T6-KBRD design files

The KiCad project lives in the Stegogo/F103C8T6-KBRD repository on GitHub; these links point at the commit this page was built from.

F103C8T6-KBRD: common questions

What microcontroller does the F103C8T6-KBRD use?

The F103C8T6-KBRD is built around the STM32F103C8Tx, from the STM32 family.

How big is the F103C8T6-KBRD PCB?

The F103C8T6-KBRD measures 65 × 46.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the F103C8T6-KBRD?

24 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the F103C8T6-KBRD design files?

From the Stegogo/F103C8T6-KBRD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the F103C8T6-KBRD design in my own project?

The repository has no license, so all rights stay with Stegogo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the F103C8T6-KBRD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards