XT30PowerModule
stephendade·XT30PowerModule
About the XT30PowerModule PCB
XT30PowerModule is an open source PCB design by stephendade, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 46.3 × 17.3 mm, with 18 components from 14 distinct parts.
Other key parts include the INA260AIPWR and TPS565201DDCR. By type, the board carries 7 capacitors, 4 connectors, 4 resistors, 2 ICs and 1 inductor.
From the project
ArduPilot power brick with XT30 connectors
For power measurement, the INA219 sensor was used due to it's more reliable readings at low current levels (<5A), making it suitable for low-power vehicles, such as ground rovers.
Max Ratings: -Max voltage 17V -Max current 15A
The power module supplies 5.2V at up to 2.5A.
The KiCAD files contain JLCPCB part ID's (LCSC) for easy manufacturing at JLCPCB.
The JST-GH connectors are standard Pixhawk power and i2c connectors (https://github.com/pixhawk/Pixhawk-Standards/blob/master/DS-009%20Pixhawk%20Connector%20Standard.pdf), and will plug straight into most flight controllers.

Main components on the XT30PowerModule
XT30PowerModule bill of materials (BOM)
18 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA260AIPWR | TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 1 | TPS565201DDCR | SOT-23-6 | U7 |
| 1 | XT30PW-M | CONN-TH_XT30PW-M | J1 |
| 1 | SM04B-GHS-TB(LF)(SN) | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J2 |
| 1 | SM06B-GHS-TB(LF)(SN) | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J3 |
| 1 | XT30PW-F | CONN-TH_XT30PW-F-1 | J4 |
| 1 | XFL4020-472MEC | IND-SMD_L4.0-W4.0_XFL4020-102MEB | L1 |
| 1 | CL05B104KO5NNNC | R_0402_1005Metric | C1 |
| 2 | GRM21BR61E106MA73L | C_0805_2012Metric | C8, C9 |
| 1 | GRM155R71C104KA88D | C_0402_1005Metric | C10 |
| 1 | C0603C104Z3VACTU | C_0603_1608Metric | C11 |
| 2 | CL10A106KP8NNNC | C_0603_1608Metric | C12, C13 |
| 3 | CRCW040210K0FKED | R_0402_1005Metric | R1, R2, R3 |
| 1 | CRCW040259K0FKED | R_0402_1005Metric | R7 |
XT30PowerModule design files
The KiCad project lives in the stephendade/XT30PowerModule repository on GitHub; these links point at the commit this page was built from.
- LayoutXT30PowerV2.kicad_pcb
- SchematicXT30PowerV2.kicad_sch
XT30PowerModule: common questions
How big is the XT30PowerModule PCB?
The XT30PowerModule measures 46.3 × 17.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XT30PowerModule?
18 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the XT30PowerModule design files?
From the stephendade/XT30PowerModule repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the XT30PowerModule design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which stephendade chose for the repository.