9 open source boards using the TPS565201DDCR

Real designs built with the TPS565201DDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the TPS565201DDCR

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS565201DDCR connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a series capacitor on 8 of 8 designs, most often 100 nF.
  • The SW pin has a inductor on 8 of 8 designs, most often 3.3 µH (then 2.2 µH).
  • The VFB pin has a resistor to GND on 7 of 8 designs, most often 10 kΩ (then 30.1 kΩ).
  • The VBST pin has a series capacitor on 7 of 8 designs, most often 100 nF.
GNDpin 1Connected to: GND 100%
SWpin 2Connected to: Signal 88%
  • Series capacitor on 100% · 100 nF (7)
  • Inductor on 100% · 3.3 µH (5), 2.2 µH (1)
VINpin 3Connected to: 5V 75% · a signal 25%
  • Decoupling capacitor on 75% · 10 µF (4), 100 nF (2), 1 µF (2)
VFBpin 4Connected to: Signal 88%
  • Resistor to GND on 88% · 10 kΩ (5), 30.1 kΩ (1)
  • Pull-up to 3.3V on 63% · 54.9 kΩ (2), 33.2 kΩ (1), 100 kΩ (1)
ENpin 5Connected to: Signal 63% · 5V 38%
  • Capacitor to GND on 38% · 22 µF (2), 100 nF (1)
  • Pull-up to BATT on 38% · 10 kΩ (3)
VBSTpin 6Connected to: Signal 100%
  • Series capacitor on 88% · 100 nF (6)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mesh radio-Halow-LoRa by ties1887, OpenHand v3 by AleksaHeler, DiceMaster HW by DanielHou315 and FlexNode by AleksaHeler.

The TPS565201DDCR in open source designs

The gallery holds 9 open source boards using the TPS565201DDCR from 8 GitHub repositories; a typical one measures about 80 × 60 mm and carries around 112 components.

56% use four copper layers or more, and 56% carry an open source license.

The most starred is Mesh radio-Halow-LoRa by ties1887.

Microcontrollers on boards using the TPS565201DDCR

What boards using the TPS565201DDCR are built for

TPS565201DDCR: common questions

Where can I find a TPS565201DDCR reference design?

Each of the 9 boards on this page is a real design using the TPS565201DDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS565201DDCR SW pin connected?

The SW pin has a series capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the TPS565201DDCR.

What resistor goes on the TPS565201DDCR VFB pin?

The VFB pin has a resistor to GND on 7 of 8 designs, most often 10 kΩ (then 30.1 kΩ). Counted from the KiCad layouts of 8 open source designs using the TPS565201DDCR.

How is the TPS565201DDCR VBST pin connected?

The VBST pin has a series capacitor on 7 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the TPS565201DDCR.

What parts are used alongside the TPS565201DDCR?

The AMS1117-3.3, DRV8833PWP, ESP32-S3-WROOM-1, ICL7660 and STM32F103RETx appear in the most repositories here.

Which microcontrollers do boards using the TPS565201DDCR use?

Most are built on ESP32 (3), Raspberry Pi (2), STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the TPS565201DDCR?

The median is 80 × 60 mm, and 44% are two-layer designs.

What is the most popular open source board using the TPS565201DDCR?

By GitHub stars, Mesh radio-Halow-LoRa by ties1887, with 39 stars.

Can I simulate one of these boards using the TPS565201DDCR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part