Hydrate hw
stephendpmurphy·hydrate-hw
About the Hydrate hw PCB
Hydrate hw is an open source PCB design by stephendpmurphy, published on GitHub under the MIT license. It is a 2-layer board measuring 30 × 45 mm, with 47 components from 25 distinct parts.
Other key parts include the AST0760MCTRQ, K32L2Bx1VFM0A, MCP73832-2-OT and LTC3536IDD. By type, the board carries 22 resistors, 8 diodes, 5 capacitors, 4 ICs, 3 switches and 2 transistors.
From the project
Hydrate Hardware
Main components on the Hydrate hw
Hydrate hw bill of materials (BOM)
47 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AST0760MCTRQ | AST0760MCTRQ | U1 |
| 1 | K32L2Bx1VFM0A | QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm | U2 |
| 1 | MCP73832-2-OT | SOT-23-5 | U3 |
| 1 | LTC3536IDD | DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mm | U4 |
| 1 | DMP3099L-7 | SOT-23 | Q1 |
| 1 | DMN3042L | SOT-23 | Q2 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | JST_BATT_IN | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 3 | PB0 | Panasonic_EVQPUK_EVQPUB | SW1, SW2, SW3 |
| 7 | B | LED_0402_1005Metric | D1, D2, D3, D4, D5, D6, D8 |
| 1 | BAT54HT1G | D_SOD-323 | D7 |
| 1 | 4.7u | C_0402_1005Metric | L1 |
| 1 | 4.7u | C_0402_1005Metric | C1 |
| 1 | 22u | C_0402_1005Metric | C2 |
| 1 | 10u | C_0402_1005Metric | C3 |
| 1 | 220p | C_0402_1005Metric | C4 |
| 1 | 47p | C_0402_1005Metric | C5 |
| 8 | 470R | R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R21, R22 |
| 7 | 10k | R_0402_1005Metric | R7, R8, R9, R12, R18, R19, R20 |
| 2 | 22R | R_0402_1005Metric | R10, R11 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 49.9k | R_0402_1005Metric | R13 |
| 1 | 6.49k | R_0402_1005Metric | R14 |
| 1 | 1M | R_0402_1005Metric | R15 |
| 1 | 221k | R_0402_1005Metric | R16 |
| 1 | 2.5k | R_0402_1005Metric | R17 |
Hydrate hw design files
The KiCad project lives in the stephendpmurphy/hydrate-hw repository on GitHub; these links point at the commit this page was built from.
- Layouthydrate.kicad_pcb
Hydrate hw: common questions
How big is the Hydrate hw PCB?
The Hydrate hw measures 30 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hydrate hw?
47 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hydrate hw design files?
From the stephendpmurphy/hydrate-hw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Hydrate hw design in my own project?
Yes, under the terms of its MIT license, which stephendpmurphy chose for the repository.