Smol-DAP
stephendpmurphy·smol-DAP·smol-DAP/smol-DAP.kicad_pcb
About the Smol-DAP PCB
Smol-DAP is an open source STM32 PCB design by stephendpmurphy, published on GitHub under the MIT license. It is a 2-layer board measuring 32.6 × 13.4 mm, with 29 components from 16 distinct parts.
Its main chip is the STM32F103CBTx, from the STM32 family. Other key parts include the AP2127K-3.3. By type, the board carries 11 resistors, 10 capacitors, 3 diodes, 2 ICs, 2 connectors and 1 crystal.
From the project
🗜️ Small form factor DAP-Link programming/debugging board
Main components on the Smol-DAP
Smol-DAP bill of materials (BOM)
29 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2127K-3.3 | SOT-23-5 | U1 |
| 1 | STM32F103CBTx | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | 8MHz | Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P1.00mm_Vertical_SMD | J3 |
| 1 | GREEN | LED_0603_1608Metric | D1 |
| 1 | BLUE | LED_0603_1608Metric | D2 |
| 1 | RED | LED_0603_1608Metric | D3 |
| 2 | 1u | C_0402_1005Metric | C1, C4 |
| 6 | 100n | C_0402_1005Metric | C2, C3, C5, C6, C7, C8 |
| 2 | 22p | C_0402_1005Metric | C9, C10 |
| 2 | 22R | R_0402_1005Metric | R1, R2 |
| 1 | 100R | R_0402_1005Metric | R3 |
| 3 | 470 | R_0402_1005Metric | R4, R5, R8 |
| 3 | 10k | R_0402_1005Metric | R6, R7, R11 |
| 2 | 4.7k | R_0402_1005Metric | R9, R10 |
Smol-DAP design files
The KiCad project lives in the stephendpmurphy/smol-DAP repository on GitHub; these links point at the commit this page was built from.
Smol-DAP: common questions
What microcontroller does the Smol-DAP use?
The Smol-DAP is built around the STM32F103CBTx, from the STM32 family.
How big is the Smol-DAP PCB?
The Smol-DAP measures 32.6 × 13.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smol-DAP?
29 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Smol-DAP design files?
From the stephendpmurphy/smol-DAP repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Smol-DAP design in my own project?
Yes, under the terms of its MIT license, which stephendpmurphy chose for the repository.
Can I test firmware for the Smol-DAP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k