HardLabs

Zulassungskarte

stonedDiscord·Automatenplatinen·Zulassungskarte/Zulassungskarte.kicad_pcb

Zulassungskarte PCB layout, top view — open source AVR/Arduino board by stonedDiscord

About the Zulassungskarte PCB

Zulassungskarte is an open source AVR/Arduino PCB design by stonedDiscord, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 88.8 × 45.5 mm, with 13 components from 7 distinct parts.

Its main chip is the ATmega48, from the AVR/Arduino family. By type, the board carries 7 resistors, 3 capacitors, 2 diodes and 1 IC.

From the project

Reverse engineerte Hardware aus deutschen Spielautomaten.

Diskussionen rund um die Entwicklung führe ich generell auf dem Automatentreff Discord: https://discord.gg/CEFa4MkQmW

Fertig sind: - Initialisierer: ein Init-Stecker für weiße CPUs. Hat 2 Taster. - ServiceTastaturWeissFake - das ist ein simpler Nachbau einer Servicetastatur für die weiße CPU. Dadurch das sie simpler ist, sind überall die Zahl 0 auf halber Helligkeit zu sehen. Verwenden lässt sie sich trotzdem. - ZLKhalter: Anscheinend beraubt jeder, der Zulassungskarten beschreibt, einen Automaten um diesen Halter. Katastrophe. - Zulassungskarte: Neuere mit Atmega48.

Main components on the Zulassungskarte

ATmega48

Zulassungskarte bill of materials (BOM)

13 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATmega48
U1
1
500mW 4.7V
D1
1
ESDA6V1U1
D2
3
100nF
C1, C2, C3
1
CL0603JN270RP
270
R1
4
470
R2, R3, R5, R6
2
10k
R4, R7

Zulassungskarte design files

The KiCad project lives in the stonedDiscord/Automatenplatinen repository on GitHub; these links point at the commit this page was built from.

Zulassungskarte: common questions

What microcontroller does the Zulassungskarte use?

The Zulassungskarte is built around the ATmega48, from the AVR/Arduino family.

How big is the Zulassungskarte PCB?

The Zulassungskarte measures 88.8 × 45.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Zulassungskarte?

13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Zulassungskarte design files?

From the stonedDiscord/Automatenplatinen repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Zulassungskarte design in my own project?

Yes, under the terms of its BSD-2-Clause license, which stonedDiscord chose for the repository.

Can I test firmware for the Zulassungskarte without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Automatenplatinen

Similar boards