Microcontroller-Projects

StratakisStavros·Microcontroller-Projects·STM32-I2C-Development-Board/hardware/stm32-i2c-board.kicad_pcb

Microcontroller-Projects PCB layout, top view — open source STM32 board by StratakisStavros

About the Microcontroller-Projects PCB

Microcontroller-Projects is an open source STM32 PCB design by StratakisStavros, published on GitHub. It is a 2-layer board measuring 40 × 28.8 mm, with 28 components from 16 distinct parts.

Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

It belongs with the test & measurement designs in this gallery.

From the project

STM32 PCB design and Arduino instrumentation: KiCad sources, design verification, manufacturing exports, serial visualization and data logging.

A compact, two-layer STM32F103C8T6 board for connecting 3.3 V I²C peripherals, developing embedded firmware and accessing the MCU through SWD. USB Micro-B supplies power and connects to the MCU's USB data pins; a separate UART header provides a serial interface.

Design revision 0.1 · KiCad 9 · 40 × 28.75 mm · 2 copper layers

Project brief (5-page PDF) · Schematic PDF · Design notes · Pinout · Verification · Manufacturing outputs

Microcontroller-Projects, from the project README
From the project README

Main components on the Microcontroller-Projects

Microcontroller-Projects bill of materials (BOM)

28 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F103C8TX
STM32F103C8Tx
U1
1
AMS1117-3.3
U2
1
16MHZ
16MHz
Y1
1
USB_B_Micro
J1
3
CONN_01X04_PIN
Conn_01x04_Pin
J2, J3, J4
1
SW_SPDT
SW1
1
LED
D1
1
120R
FB1
5
100N
100n
C1, C2, C3, C4, C9
1
10U
10u
C5
1
10N
10n
C6
2
1u
C7, C8
2
10P
10p
C10, C11
2
22U
22u
C12, C13
1
10K
10k
R1
4
1K5
1k5
R2, R3, R4, R5

Microcontroller-Projects design files

The KiCad project lives in the StratakisStavros/Microcontroller-Projects repository on GitHub; these links point at the commit this page was built from.

Microcontroller-Projects: common questions

What microcontroller does the Microcontroller-Projects use?

The Microcontroller-Projects is built around the STM32F103C8TX, from the STM32 family.

How big is the Microcontroller-Projects PCB?

The Microcontroller-Projects measures 40 × 28.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Microcontroller-Projects?

28 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Microcontroller-Projects design files?

From the StratakisStavros/Microcontroller-Projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Microcontroller-Projects design in my own project?

The repository has no license, so all rights stay with StratakisStavros. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Microcontroller-Projects without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards