Caretaker
About the Caretaker PCB
Caretaker is an open source PCB design by sujaldeshmukh1012, published on GitHub under the MIT license. It is a 2-layer board measuring 99 × 70 mm, with 32 components from 17 distinct parts.
Other key parts include the ABX00028. By type, the board carries 17 connectors, 4 transistors, 3 diodes, 3 resistors, 2 capacitors and 1 IC.
It belongs with the sensors, rf & radio and displays & leds designs in this gallery.
From the project
C/C++ • ESP32-CAM • Arduino Nano • FreeRTOS • PlatformIO • KiCad PCB Design
C/C++ • ESP32-CAM • Arduino Nano • FreeRTOS • PlatformIO • KiCad PCB Design
- Overview - Features - Hardware Components - PCB Design - PCB Images - Design Process - Bill of Materials - Project Structure - Getting Started - Prerequisites - Installation - Usage - Testing - System Architecture - Implimentation - Contributing - License - Author - Acknowledgments
GuardianHAT is a comprehensive embedded systems solution that integrates GPS tracking, environmental sensing, and real-time monitoring capabilities. The project features two main components: an ESP32-CAM based system for camera…
Main components on the Caretaker
Caretaker bill of materials (BOM)
32 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ABX00028 | MODULE_ABX00028 | U1 |
| 4 | 2N7000 | TO-92_Inline | Q1, Q2, Q3, Q4 |
| 2 | Conn_01x07_Socket | PinHeader_1x07_P2.54mm_Vertical | J1, J2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J3, J4 |
| 2 | Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | J5, J17 |
| 4 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J6, J7, J8, J9 |
| 2 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J10, J11 |
| 4 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J12, J13, J14, J15 |
| 1 | Conn_01x08_Socket | PinHeader_1x08_P2.54mm_Vertical | J16 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | 1825967-2 | SW_1825967-2 | S1 |
| 1 | LED | LED_D5.0mm | D1 |
| 2 | D_Schottky | D_5W_P5.08mm_Vertical_KathodeUp | D2, D3 |
| 1 | C_US | C_Radial_D6.3mm_H5.0mm_P2.50mm | C1 |
| 1 | C_US | C_Radial_D6.3mm_H11.0mm_P2.50mm | C2 |
| 1 | 330 ohm | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 2 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2, R3 |
Caretaker design files
The KiCad project lives in the sujaldeshmukh1012/GuardianHat repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB_Design/Caretaker.kicad_pcb
- SchematicPCB_Design/Caretaker.kicad_sch
Caretaker: common questions
How big is the Caretaker PCB?
The Caretaker measures 99 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Caretaker?
32 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Caretaker design files?
From the sujaldeshmukh1012/GuardianHat repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Caretaker design in my own project?
Yes, under the terms of its MIT license, which sujaldeshmukh1012 chose for the repository.
More boards in GuardianHat
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k