BC--LM2596--ADJ

sujitkumar05-pcb·BC--LM2596--ADJ

BC--LM2596--ADJ PCB layout, top view — open source board by sujitkumar05-pcb

About the BC--LM2596--ADJ PCB

BC--LM2596--ADJ is an open source PCB design by sujitkumar05-pcb, published on GitHub. It is a 2-layer board measuring 43 × 21 mm, with 15 components from 12 distinct parts.

Other key parts include the LM2596S-ADJ. By type, the board carries 4 connectors, 4 capacitors, 2 diodes, 2 resistors, 1 IC and 1 inductor.

From the project

DC-DC switching regulator based on LM2596-ADJ Adjustable output voltage using feedback resistor network Designed and simulated using KiCad High efficiency compared to linear regulators Optimized PCB layout for low ripple and stability Supports wide input voltage range (as per datasheet) Includes schematic, PCB layout, Gerber files, BOM

The BC–LM2596–ADJ project is a DC–DC buck converter based on the LM2596 adjustable regulator, designed to efficiently step down a higher DC voltage to a stable, adjustable lower output. The circuit supports up to 3A output current and is suitable for embedded systems, power electronics, and prototyping applications. The schematic and PCB were designed using KiCad, following standard power PCB layout practices. -----

BC--LM2596--ADJ, from the project README
From the project README

Main components on the BC--LM2596--ADJ

BC--LM2596--ADJ bill of materials (BOM)

15 components, 12 distinct parts.

QtyPartRefs
1
LM2596S-ADJ
U1
4
Conn_01x01_Pin
J1, J2, J3, J4
1
10K
RV1
1
SS34
D1
1
LED
D2
1
47uH
L1
1
100nF
C1
1
100uF
C2
1
100nF
C3
1
220uF
C4
1
47K
R1
1
1k
R2

BC--LM2596--ADJ design files

The KiCad project lives in the sujitkumar05-pcb/BC--LM2596--ADJ repository on GitHub; these links point at the commit this page was built from.

BC--LM2596--ADJ: common questions

How big is the BC--LM2596--ADJ PCB?

The BC--LM2596--ADJ measures 43 × 21 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BC--LM2596--ADJ?

15 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the BC--LM2596--ADJ design files?

From the sujitkumar05-pcb/BC--LM2596--ADJ repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BC--LM2596--ADJ design in my own project?

The repository has no license, so all rights stay with sujitkumar05-pcb. Use it as a reference, and ask the author before reusing the design.