TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection

sushanthkulal·TinyML-Powered-Edge-AI-Hand-Band-for-Sudden-Fall-Detection

TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection PCB layout, top view — open source board by sushanthkulal

About the TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection PCB

TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection is an open source PCB design by sushanthkulal, published on GitHub. It is a 2-layer board measuring 63.2 × 80.2 mm, with 14 components from 14 distinct parts.

Other key parts include the motion sensor, TP5100, glyph-s3, gsense-microphone_1ch and wear detector. By type, the board carries 6 ICs, 2 diodes, 1 connector, 1 speaker and 1 switch.

It belongs with the wearables, iot & wireless and sensors designs in this gallery.

From the project

TinyML-based wearable hand band for real-time fall detection using Edge AI on ESP32-S3, featuring on-device inference, low-power design, and emergency alert capability.

TinyML-Powered Edge AI Hand Band for Sudden Fall Detection

Overview This project is a wearable fall detection device built using an ESP32-S3 microcontroller and an IMU sensor. The system continuously monitors motion data such as acceleration and orientation. A TinyML model (or threshold-based logic) processes this data directly on the device to detect sudden falls in real time. When a fall is detected, the system can trigger an alert using BLE, WiFi, or a buzzer.

Main components on the TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection

motion sensorTP5100glyph-s3gsense-microphone_1chwear detector

TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection bill of materials (BOM)

14 components, 14 distinct parts.

QtyPartRefs
1
motion sensor
U1
1
TP5100
~
U2
1
glyph-s3
U3
1
gsense-microphone_1ch
U4
1
~
U5
1
wear detector
U7
1
LIPO BATTERY
J1
1
10K
10k
1
100
100
1
220
220
1
buzzer
LS1
1
SW_Push_Dual
SW1
1
GREEN
D1
1
RED
D2

TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection design files

The KiCad project lives in the sushanthkulal/TinyML-Powered-Edge-AI-Hand-Band-for-Sudden-Fall-Detection repository on GitHub; these links point at the commit this page was built from.

TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection: common questions

How big is the TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection PCB?

The TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection measures 63.2 × 80.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection?

14 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection design files?

From the sushanthkulal/TinyML-Powered-Edge-AI-Hand-Band-for-Sudden-Fall-Detection repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection design in my own project?

The repository has no license, so all rights stay with sushanthkulal. Use it as a reference, and ask the author before reusing the design.

Similar boards