14 open source boards using the TP5100
Real designs built with the TP5100, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ControlBoard
paradise-fi
76 × 76 mm207 parts4LCC-BY-NC-4.042STM32
Main
HelloAlex4
115 × 82.3 mm249 parts4LCC-BY-NC-4.010ESP32
Smart-Universal-Remote with-Learning function and-Google-Assistant-Support
Circuit-Digest
50 × 145 mm73 parts2LNo license3AVR/Arduino
1. PDU
SshgurkiratSingh
149.5 × 113 mm106 parts4LNo license2ESP32
WellD
kinggh0stee
100 × 55 mm99 parts2LMIT2ESP32
Soil metrics
Aryan-git-byte
88.3 × 112.3 mm74 parts4LMIT1ESP32
Flex smart card
kamaljavvadi16-alt
50 × 94.5 mm62 parts4LNo license0ESP32
Alaska-Deluxe-Generator
thehelmetedheinsight
75 × 55 mm54 parts2LGPL-3.00ESP32
Flytboj
obobed
109.7 × 95.3 mm54 parts2LGPL-3.00TinyML-Powered-Edge-AI-Hand-Band for-Sudden-Fall-Detection
sushanthkulal
63.2 × 80.2 mm14 parts2LNo license0- schematic only · 18 parts
E3088F-Project
crisrwats99
18 partsNo license0 PowerSupply
HelloAlex4
42.7 × 39.8 mm48 parts2LCC-BY-NC-4.010Microbot(2024-10-31 160842)
Freimor
90 × 110 mm128 parts4LNo license0ESP8266-Breakdown Board
Chirag-Vadrali
87.5 × 65 mm60 parts2LNo license1
How designs wire the TP5100
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TP5100 connects to, and the resistors, capacitors and other passives placed on it.
- The LX_2 pin has a inductor on 8 of 11 designs, most often 22 µH (then 10 µH).
- The LX_3 pin has a inductor on 8 of 11 designs, most often 22 µH (then 10 µH).
- The VIN_5 pin has a capacitor to GND on 6 of 11 designs, most often 100 nF (then 10 µF).
- The VS_8 pin has a inductor on 6 of 10 designs, most often 22 µH (then 10 µH).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIN_1pin 1 | Connected to: A connector 27% · 3.3V 36% |
|
| LX_2pin 2 | Connected to: Signal 82% |
|
| LX_3pin 3 | Connected to: Signal 82% |
|
| VIN_4pin 4 | Connected to: A connector 27% · not connected 18% · 12V 27% |
|
| VIN_5pin 5 | Connected to: A connector 27% · 12V 27% |
|
| PWR_ON-_6pin 6 | Connected to: Not connected 70% · a signal 20% | — |
| GND_7pin 7 | Connected to: GND 80% | — |
| VS_8pin 8 | Connected to: Signal 80% |
|
| BAT_9pin 9 | Connected to: BAT+ 50% · a signal 40% |
|
| VREG_10pin 10 | Connected to: Signal 70% · not connected 20% |
|
| TS_11pin 11 | Connected to: GND 50% · a signal 50% |
|
| RTRICK_12pin 12 | Connected to: GND 60% · a signal 40% |
|
| VIN_16pin 16 | Connected to: A connector 33% · 12V 33% |
|
| EXP_17pin 17 | Connected to: GND 78% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ControlBoard by paradise-fi, MainPCB by HelloAlex4, Smart-Universal-Remote with-Learning function and-Google-Assistant-Support by Circuit-Digest and 1. PDU by SshgurkiratSingh.
The TP5100 in open source designs
The gallery holds 14 open source boards using the TP5100 from 13 GitHub repositories; a typical one measures about 87.5 × 82.3 mm and carries around 68 components.
54% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is ControlBoard by paradise-fi.
Parts used alongside the TP5100
Microcontrollers on boards using the TP5100
What boards using the TP5100 are built for
TP5100: common questions
Where can I find a TP5100 reference design?
Each of the 14 boards on this page is a real design using the TP5100. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TP5100 LX_2 pin connected?
The LX_2 pin has a inductor on 8 of 11 designs, most often 22 µH (then 10 µH). Counted from the KiCad layouts of 11 open source designs using the TP5100.
How is the TP5100 LX_3 pin connected?
The LX_3 pin has a inductor on 8 of 11 designs, most often 22 µH (then 10 µH). Counted from the KiCad layouts of 11 open source designs using the TP5100.
How is the TP5100 VIN_5 pin connected?
The VIN_5 pin has a capacitor to GND on 6 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the TP5100.
What parts are used alongside the TP5100?
The MT3608, AMS1117-3.3, AP63205WU and DW01A appear in the most repositories here.
Which microcontrollers do boards using the TP5100 use?
Most are built on ESP32 (7), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the TP5100?
The median is 87.5 × 82.3 mm, and 54% are two-layer designs.
What is the most popular open source board using the TP5100?
By GitHub stars, ControlBoard by paradise-fi, with 42 stars.
Can I simulate one of these boards using the TP5100 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.