Spotwelderix
About the Spotwelderix PCB
Spotwelderix is an open source PCB design by swifty99, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 70 mm, with 58 components from 25 distinct parts.
Other key parts include the IXDD604SIA, DS18B20 and AD8209. By type, the board carries 19 capacitors, 13 resistors, 12 transistors, 5 ICs, 4 connectors and 3 diodes.
From the project
Spotwelderix
Main components on the Spotwelderix
Spotwelderix bill of materials (BOM)
58 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IXDD604SIA | SOIC127P600X175-8N | IC1, IC2 |
| 1 | DS18B20 | TO-92_Inline_Horizontal1 | U1 |
| 2 | AD8209 | MSOP-8_3x3mm_P0.65mm | U2, U3 |
| 8 | IRFB7430 | TO-263-2 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | BC817 | SOT-23 | Q9 |
| 1 | FQP27P06 | TO-220-3_Horizontal_TabDown | Q10 |
| 2 | DMG3402_SOT23_n_Fet_3A | SOT-23_Handsoldering | Q11, Q12 |
| 1 | OnOffTast | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 2 | XT90 | AMASS_XT60-M_1x02_P7.20mm_Vertical | J3, J6 |
| 1 | CONN_01X09 | JST_XH_B9B-XH-A_1x09_P2.50mm_Vertical | P1 |
| 2 | 50A | Blade_Fuse_maxi_handsolder_1.5drill | F1, F4 |
| 2 | RF2001NS2D | TO-263-2_TabPin1 | D1, D3 |
| 1 | D | D_SMA_Handsoldering | D2 |
| 14 | 10µ | C_1206_3216Metric | C1, C2, C3, C4, C5, C6, C7, C8 +6 |
| 1 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 470µ | CP_Radial_D10.0mm_P5.00mm | C14 |
| 3 | 470p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C17, C18 |
| 2 | 15k | R_0805_2012Metric | R1, R7 |
| 2 | 10k | R_0805_2012Metric | R2, R3 |
| 3 | 100 | R_0805_2012Metric | R4, R8, R10 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22k | R_0805_2012Metric | R5, R6 |
| 1 | 2.5k | R_0805_2012Metric | R9 |
| 1 | 2k5 | R_0805_2012Metric | R11 |
| 1 | 55k | R_0805_2012Metric | R13 |
| 1 | 47k | R_0805_2012Metric | R15 |
Spotwelderix design files
The KiCad project lives in the swifty99/Spotwelderix repository on GitHub; these links point at the commit this page was built from.
Spotwelderix: common questions
How big is the Spotwelderix PCB?
The Spotwelderix measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Spotwelderix?
58 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Spotwelderix design files?
From the swifty99/Spotwelderix repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Spotwelderix design in my own project?
Yes, under the terms of its GPL-3.0 license, which swifty99 chose for the repository.
