Controller V2
About the Controller V2 PCB
Controller V2 is an open source PCB design by Syntaxer04, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 231.2 × 156.8 mm, with 169 components from 9 distinct parts.
By type, the board carries 97 diodes, 63 relays, 6 connectors and 3 resistors.
From the project
8-Bit Relay Computer inspired by Harry Porter and DipDot
Controller V2 bill of materials (BOM)
169 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x25_Counter_Clockwise | PinSocket_2x25_P2.54mm_Horizontal | J1 |
| 1 | Conn_02x17_Counter_Clockwise | PinSocket_2x17_P2.54mm_Horizontal | J57 |
| 2 | Conn_02x20_Counter_Clockwise | PinSocket_2x20_P2.54mm_Horizontal | J58, J76 |
| 1 | Conn_02x10_Counter_Clockwise | PinSocket_2x10_P2.54mm_Horizontal | J59 |
| 1 | Conn_02x02_Counter_Clockwise | PinSocket_2x02_P2.54mm_Horizontal | J61 |
| 63 | HK19F-DCxxV-SHC | Relay_DPDT_Finder_30.22 ohne SilkS | K1, K2, K3, K4, K5, K6, K7, K8 +55 |
| 94 | 1N914 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +86 |
| 3 | LED | LED_D5.0mm ohne SilkS | D77, D81, D85 |
| 3 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R10, R11 |
Controller V2 design files
The KiCad project lives in the Syntaxer04/RC1Computer repository on GitHub; these links point at the commit this page was built from.
Controller V2: common questions
How big is the Controller V2 PCB?
The Controller V2 measures 231.2 × 156.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Controller V2?
169 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Controller V2 design files?
From the Syntaxer04/RC1Computer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Controller V2 design in my own project?
Yes, under the terms of its GPL-3.0 license, which Syntaxer04 chose for the repository.
More boards in RC1Computer
Cond.memory
253.4 × 291.8 mm397 parts2LGPL-3.04
ALU V2 v2 - Logik
172.5 × 226.3 mm172 parts2LGPL-3.04
Sequencer
197.8 × 172.8 mm166 parts2LGPL-3.04
Fulladder
202.5 × 144.2 mm162 parts2LGPL-3.04
Tape loader
214.9 × 303.2 mm142 parts2LGPL-3.04
ALU V2
170.9 × 161.2 mm141 parts2LGPL-3.04
Front Panel V2
164 × 149.4 mm122 parts2LGPL-3.04
Decoder V2
219.8 × 145.4 mm122 parts2LGPL-3.04
Memory V2
162.6 × 148 mm117 parts2LGPL-3.04
Incrementer V2
224.4 × 178.6 mm111 parts2LGPL-3.04
Bridge V2
282.7 × 222.9 mm90 parts2LGPL-3.04
Earlier revisions in the repo: Controller