Magic Wand Timer Simplified
About the Magic Wand Timer Simplified PCB
Magic Wand Timer Simplified is an open source PCB design by synthesissolutions, published on GitHub. It is a 4-layer board measuring 66 × 48.3 mm, with 21 components from 14 distinct parts.
Other key parts include the NE555P. By type, the board carries 5 capacitors, 5 resistors, 3 connectors, 3 diodes, 1 IC and 1 transistor.
Main components on the Magic Wand Timer Simplified
Magic Wand Timer Simplified bill of materials (BOM)
21 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U2 |
| 1 | C2565 IRF530N | TO-220-3_Horizontal_TabDown | Q1 |
| 3 | 2.54mm | TerminalBlock_bornier-2_P5.08mm | J1, J2, J3 |
| 1 | C142664 + 2x C151075 Fuse | Fuseholder_Clip-5x20mm_Littelfuse_111_Lateral_P18.80x5.00mm_D1.17mm_Horizontal | F1 |
| 1 | 1M | Potentiometer_Bourns_3386F_Vertical | RV1 |
| 1 | SW_Push | SW_PUSH_6mm | SW2 |
| 1 | GREEN | LED_D5.0mm_Clear | D1 |
| 1 | RED | LED_D5.0mm_Clear | D2 |
| 1 | C5148433 D | D_DO-201AD_P12.70mm_Horizontal | D3 |
| 3 | C503219 10uF | C_Radial_D5.0mm_H11.0mm_P2.00mm | C1, C3, C5 |
| 2 | C2832505 10nF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C4 |
| 1 | 560 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 3 | 100K | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2, R3, R4 |
| 1 | 680R | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R5 |
Magic Wand Timer Simplified design files
The KiCad project lives in the synthesissolutions/geeksforkids repository on GitHub; these links point at the commit this page was built from.
Magic Wand Timer Simplified: common questions
How big is the Magic Wand Timer Simplified PCB?
The Magic Wand Timer Simplified measures 66 × 48.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Magic Wand Timer Simplified?
21 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Magic Wand Timer Simplified design files?
From the synthesissolutions/geeksforkids repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Magic Wand Timer Simplified design in my own project?
The repository has no license, so all rights stay with synthesissolutions. Use it as a reference, and ask the author before reusing the design.
More boards in geeksforkids
RP2040/RP2350Electronics Control Unit (ECU)
120 × 100 mm344 parts8LNo license2
Brushed DC Motor Driver
50 × 100 mm77 parts4LNo license2
AVR/ArduinoATTinyBreakOut DFRobot Amp
72.6 × 47.5 mm62 parts4LNo license2
AVR/ArduinoControlBoardT4 DFminiSound PowerAmp
72.6 × 89.1 mm56 parts4LNo license2
Pulse PWM Timer
27.9 × 43.2 mm51 parts4LNo license2
ControlBoardPico ExpansionBoard
72.6 × 89.1 mm43 parts4LNo license2
NXPControlBoardT4 22PinSound PowerAmp
72.6 × 89.1 mm40 parts2LNo license2
Pulse Fixed Timer
27.9 × 43.2 mm40 parts4LNo license2
VS1000SimpleBreakout
50 × 25.4 mm39 parts2LNo license2
Magic Wand Timer
27.9 × 43.2 mm33 parts4LNo license2
Audio Amplifier
27.9 × 44.5 mm31 parts4LNo license2