Electrical-Measuring-System

Szaborobert5·Electrical-Measuring-System·main/PCB/Legatronics_project.kicad_pcb

Electrical-Measuring-System PCB layout, top view — open source STM32 board by Szaborobert5

About the Electrical-Measuring-System PCB

Electrical-Measuring-System is an open source STM32 PCB design by Szaborobert5, published on GitHub. It is a 2-layer board measuring 68 × 120 mm, with 69 components from 41 distinct parts.

Its main chip is the 497-STM32G431K6T6-ND, from the STM32 family. Other key parts include the MCP16301T-I/CHYTR-ND and ATM90E26-YU-RTR-ND. By type, the board carries 26 capacitors, 23 resistors, 5 connectors, 4 diodes, 3 ICs and 3 switches.

It belongs with the displays & leds and power & battery designs in this gallery.

From the project

This project was built for OHMSprint competition 2026. The goal was to design a system which could measure the following : AC/DC voltage, AC frequency, active power and active energy consumption. The system was based around an ATM90E26 measuring chip and an STM32 microcontroller

The PCB was designed in KiCad and firmware was written in STM32CubeIDE. The goal of this project is to develop a device that can measure AC/DC voltage, AC frequency, active power and active energy consumption. This PCB has two layers(signal and ground).

- Power supply section - Microntroller STM32 - Measuring chip ATM90E26 - OLED Diplay

SPI communication is used for ATM90E26 and OLED display. SWD is used for microcontroller programming. A buck converter is used for power supply

Electrical-Measuring-System, from the project README
From the project README

Main components on the Electrical-Measuring-System

MCP16301T-I/CHYTR-ND497-STM32G431K6T6-NDATM90E26-YU-RTR-ND

Electrical-Measuring-System bill of materials (BOM)

69 components, 41 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP16301T-I/CHYTR-ND
MCP16301x-xCH
U1
1
497-STM32G431K6T6-ND
STM32G431K6Tx
U2
1
ATM90E26-YU-RTR-ND
ATM90E26-YU
U3
1
1051640001
USB-B-1051640001
J1
1
A19471-ND
Conn_01x05_Pin
J2
1
CP-002AHPJTR-ND
PJ-002AH-SMT-TR
J3
1
CP-3523SJTR-ND
SJ-3523-SMT-TR
J4
1
455-B8B-XH-A-ND
B8B-XH-A
J5
1
311-1088-2-ND
100nF
Cboost1
1
XC3145TR-ND
8.192MHz
ECS-81.92-12-30Q-EN-TR1
1
644-STDCRA3-8MTR-ND
8Mhz
NDK–STDCRA3-8M1
3
108-PTS636SM43SMTRLFSTR-ND
PTS636_SM43J_SMTR_LFS
S1, S2, S4
1
1514-CBRHDSH2-40TR13PBFREETR-ND
CBRHDSH2-40 TR13 PBFREE
D1
1
B240A-FDITR-ND
B240
D2
1
1N4148WSFSTR-ND
1N4148WS
D3
1
160-1435-2-ND
PWR
D4
1
240-2375-2-ND
120
FB1
1
SRP4020TA-150MTR-ND
15uH
L1
2
445-5043-2-ND
8p
C1, C3
4
1276-1946-2-ND
1uF
C2, C11, C14, C17
Show 21 more
QtyPartRefs
1
493-2181-2-ND
470uF
C4
6
311-1088-2-ND
100nF
C5, C8, C9, C23, C24, C27
1
587-1441-2-ND
4.7uF
C6
3
587-1295-2-ND
10uF
C7, C12, C13
1
399-C0603C103K8RACTUTR-ND
10nF
C10
2
490-GRM31C5C1E334JE01LTR-ND
330nF
C16, C21
1
399-C0603C102K8RACTUTR-ND
1nF
C18
2
478-KGM21NR71H333JTTR-ND
33nF
C19, C20
2
1292-1480-2-ND
12p
C22, C25
1
PCE3878TR-ND
10uF
C26
5
311-10.0KHRTR-ND
10k
R1, R3, R4, R6, R10
1
RMCF0603FT31K6TR-ND
31.6k
R5
2
P22.0LTR-ND
22R
R7, R8
1
311-62.0FRTR-ND
62R
R9
2
541-100AFTR-ND
100R
R12, R13
5
118-CR2512-JW-362ELFTR-ND
3.6k
R14, R18, R19, R20, R21
2
RMCF2512JT24K0TR-ND
2R4
R15, R16
1
408-1933-2-ND
51R
R17
1
P33KDBTR-ND
33k
R22
1
311-82KGRTR-ND
82k
R23
2
541-1.00KAFTR-ND
1k
R24, R25

Electrical-Measuring-System design files

The KiCad project lives in the Szaborobert5/Electrical-Measuring-System repository on GitHub; these links point at the commit this page was built from.

Electrical-Measuring-System: common questions

What microcontroller does the Electrical-Measuring-System use?

The Electrical-Measuring-System is built around the 497-STM32G431K6T6-ND, from the STM32 family.

How big is the Electrical-Measuring-System PCB?

The Electrical-Measuring-System measures 68 × 120 mm, has 2 copper layers and is 1.59 mm thick.

How many components are on the Electrical-Measuring-System?

69 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Electrical-Measuring-System design files?

From the Szaborobert5/Electrical-Measuring-System repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Electrical-Measuring-System design in my own project?

The repository has no license, so all rights stay with Szaborobert5. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Electrical-Measuring-System without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards