Vga3
szym-mie·vga3·kicad/xillinx_vga_spi.kicad_pcb
About the Vga3 PCB
Vga3 is an open source PCB design by szym-mie, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 66 × 62.2 mm, with 16 components from 12 distinct parts.
Other key parts include the IS61C5128AL-10KLI. By type, the board carries 7 resistors, 4 connectors, 2 capacitors, 1 IC, 1 transistor and 1 diode.
From the project
Redesign of 'vga_src' video card architcture using proper FIFOs
This module works in standard VGA mode of 640x480 at 60Hz monitor refresh rate. The picture itself was scaled down to 160x120, but can be reverted to be true 640x480.
SPI connection requires 3.3V voltage level for safe operation
Apart from standard VGA connector, there is a SPI connection:
The video memory access is handled by module vmmu.v, which coordinates read access by VGA display unit and write access by SPI interface.

Main components on the Vga3
Vga3 bill of materials (BOM)
16 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IS61C5128AL-10KLI | SOJ-36_10.16x23.49mm_P1.27mm | U1 |
| 1 | 2N7002H | SOT-23 | Q1 |
| 1 | HEADER_P1 | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | HEADER_P2 | PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | VGA_CONN | L77HDE15SD1CH4FVGA | J3 |
| 1 | SPI | PinSocket_1x04_P2.54mm_Horizontal | J4 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 50n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 3 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5 |
| 3 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R6 |
| 1 | 120 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
Vga3 design files
The KiCad project lives in the szym-mie/vga3 repository on GitHub; these links point at the commit this page was built from.
Vga3: common questions
How big is the Vga3 PCB?
The Vga3 measures 66 × 62.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vga3?
16 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vga3 design files?
From the szym-mie/vga3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Vga3 design in my own project?
Yes, under the terms of its BSD-3-Clause license, which szym-mie chose for the repository.