9 open source boards using the IS61C5128AL-10KLI

Real designs built with the IS61C5128AL-10KLI, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the IS61C5128AL-10KLI

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the IS61C5128AL-10KLI connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 4 of 6 designs, most often 1 µF (then 100 nF).
VDDpin 9, 27Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 67% · 1 µF (5), 100 nF (1), 50 nF (1)
GNDpin 10, 28Connected to: GND 83% · a signal 17%
NCpin 19, 36Connected to: Not connected 91%

30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Graphics gremlin by schlae, TestSRAM by aslak3, Flash rom expansion by rosco-m68k and Fpga gpu by nojan1.

The IS61C5128AL-10KLI in open source designs

The gallery holds 9 open source boards using the IS61C5128AL-10KLI from 6 GitHub repositories; a typical one measures about 99.3 × 75.9 mm and carries around 28 components.

78% are two-layer designs, the rest use four layers or more, and 78% carry an open source license.

The most starred is Graphics gremlin by schlae.

Microcontrollers on boards using the IS61C5128AL-10KLI

What boards using the IS61C5128AL-10KLI are built for

IS61C5128AL-10KLI: common questions

Where can I find a IS61C5128AL-10KLI reference design?

Each of the 9 boards on this page is a real design using the IS61C5128AL-10KLI. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the IS61C5128AL-10KLI VDD pin?

The VDD pins have a decoupling capacitor on 4 of 6 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the IS61C5128AL-10KLI.

What parts are used alongside the IS61C5128AL-10KLI?

The ICE40HX4K-TQ144, 74ALVC164245, 74HCT125, ADA4891-3 and AP2114HA-1.2 appear in the most repositories here.

Which microcontrollers do boards using the IS61C5128AL-10KLI use?

Most are built on FPGA (3).

How big is a typical board using the IS61C5128AL-10KLI?

The median is 99.3 × 75.9 mm, and 78% are two-layer designs.

What is the most popular open source board using the IS61C5128AL-10KLI?

By GitHub stars, Graphics gremlin by schlae, with 578 stars.

Can I simulate one of these boards using the IS61C5128AL-10KLI before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part