STM32F103C8T6
t-shoode·STM32F103C8T6
About the STM32F103C8T6 PCB
STM32F103C8T6 is an open source STM32 PCB design by t-shoode, published on GitHub. It is a 4-layer board measuring 37.1 × 32 mm, with 25 components from 13 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the LD1117V33. By type, the board carries 12 capacitors, 4 connectors, 4 resistors, 2 ICs, 1 crystal and 1 switch.
Main components on the STM32F103C8T6
STM32F103C8T6 bill of materials (BOM)
25 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | LD1117V33 | SOT-223 | U2 |
| 1 | Crystal | Crystal_HC49-U_Vertical | Y1 |
| 1 | Conn_01x09 | PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | USB_B_Mini | USB_Mini-B_Wuerth_65100516121_Horizontal | J5 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | LED | LED_0402_1005Metric | D1 |
| 9 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C6, C8, C10, C11 +1 |
| 2 | 2u2 | C_0504_1310Metric | C5, C7 |
| 1 | 10u | C_0603_1608Metric | C9 |
| 4 | 1k | R_0402_1005Metric | R1, R2, R3, R4 |
STM32F103C8T6 design files
The KiCad project lives in the t-shoode/STM32F103C8T6 repository on GitHub; these links point at the commit this page was built from.
- LayoutSTM32F103C8T6.kicad_pcb
- SchematicSTM32F103C8T6.kicad_sch
STM32F103C8T6: common questions
What microcontroller does the STM32F103C8T6 use?
The STM32F103C8T6 is built around the STM32F103C8Tx, from the STM32 family.
How big is the STM32F103C8T6 PCB?
The STM32F103C8T6 measures 37.1 × 32 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM32F103C8T6?
25 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F103C8T6 design files?
From the t-shoode/STM32F103C8T6 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32F103C8T6 design in my own project?
The repository has no license, so all rights stay with t-shoode. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F103C8T6 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k