Solarpunk microgrid ag router
t4rxnn-devel·solarpunk-microgrid-ag-router·hardware/schematics/solarpunk_router.kicad_pcb
About the Solarpunk microgrid ag router PCB
Solarpunk microgrid ag router is an open source NXP PCB design by t4rxnn-devel, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 120 × 80 mm, with 4 components from 2 distinct parts.
By type, the board carries 3 ICs and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
Because saving the world from grid collapse takes more than hoping for the best, it demands real MPPT, honest math, and code that doesn't melt
Traditional MPPT algorithms oscillate around the maximum power point or get trapped in local maxima under partial shading. This engine handles it by:
Dynamic Step Sizing: Scaling perturbation magnitude proportionally to the $\frac{dP}{dV}$ derivative slope. When nearing the true peak ($\frac{dP}{dV} \to 0$), the step sizes shrink automatically to stop jittering. Global Sweep Scans: Periodically dropping the voltage setpoint to sweep the entire I-V curve, ensuring you lock onto the absolute global maximum instead of a lazy local hump.
Solarpunk microgrid ag router bill of materials (BOM)
4 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | — | U1, U2, U3 | |
| 1 | — | Q1 |
Solarpunk microgrid ag router design files
The KiCad project lives in the t4rxnn-devel/solarpunk-microgrid-ag-router repository on GitHub; these links point at the commit this page was built from.
Solarpunk microgrid ag router: common questions
How big is the Solarpunk microgrid ag router PCB?
The Solarpunk microgrid ag router measures 120 × 80 mm and has 2 copper layers.
How many components are on the Solarpunk microgrid ag router?
4 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Solarpunk microgrid ag router design files?
From the t4rxnn-devel/solarpunk-microgrid-ag-router repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Solarpunk microgrid ag router design in my own project?
Yes, under the terms of its Apache-2.0 license, which t4rxnn-devel chose for the repository.
Can I test firmware for the Solarpunk microgrid ag router without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
ICED-L
kiibohd
175.4 × 145 mm163 partsCERN-OHL-1.2415NXP
WhiteFox
kiibohd
304.8 × 101.1 mm296 partsCERN-OHL-1.2415NXP
K-Type
kiibohd
357.5 × 131.8 mm361 partsCERN-OHL-1.2415NXP
IC60
kiibohd
285 × 95 mm242 partsCERN-OHL-1.2415