Preview
About the Preview PCB
Preview is an open source PCB design by Takazudo, published on GitHub. It is a 2-layer board measuring 110 × 85 mm, with 75 components from 40 distinct parts.
Other key parts include the C2071044, C347423, C459702 and C666306. By type, the board carries 32 capacitors, 18 resistors, 6 ICs, 5 connectors, 3 LEDs and 3 inductors.
From the project
Review-only assembly. Open preview.kicad_pcb in KiCad and use its 3D viewer. Component models are bundled locally; no global model path is needed. This file adds one BOM/CPL-excluded display footprint for Board P and must not be used for fabrication. The source PCBs are unchanged
Review-only assembly. Open preview.kicad_pcb in KiCad and use its 3D viewer. Component models are bundled locally; no global model path is needed. This file adds one BOM/CPL-excluded display footprint for Board P and must not be used for fabrication. The source PCBs are unchanged. Nominal CAD fit does not qualify installed hardware, wire/screwdriver access or powered behavior.
Main components on the Preview
Preview bill of materials (BOM)
75 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2071044 AP63201WU-7 | TSOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U2 |
| 2 | C347423 LM2596S-ADJ | TO-263-5_L10.2-W8.9-P1.70-BR | U3, U4 |
| 2 | C459702 LT1963AEQ#TRPBF | TO-263-5_L10.6-W9.6-P1.70-LS15.9-BR | U6, U7 |
| 1 | C666306 LT3015EQ#PBF | DD-PAK-5_L10.2-W8.9-P1.70-LS14.0-BR | U8 |
| 1 | C2832269 PM254V-11-06-H85 | HDR-TH_6P-P2.54-V-F | J5 |
| 2 | C8465 WJ500V-5.08-2P | WJ500V-5.08-2P_C8465 | J6, J7 |
| 2 | C4749189 DW254P-2X8-L0 | IDC-TH_16P-P2.54_321016RG0ABK00A01 | J10, J11 |
| 1 | C7529589 SMD1210P150TF/16 | F1210 | PTC1 |
| 1 | C70119 mSMD110-33V | F1812 | PTC2 |
| 1 | C883133 BSMD1206-150-16V | F1206 | PTC3 |
| 2 | C571368 SMAJ15A | D-FLAT_L4.3-W2.6-LS5.3-RD | TVS1, TVS3 |
| 1 | C87267 SMAJ6.5A | D-FLAT_L4.3-W2.6-LS5.3-RD | TVS2 |
| 1 | C2289 Green | LED0603-RD | LED2 |
| 1 | C2288 Blue | LED0603-RD | LED3 |
| 1 | C2286 Red | LED0603-RD | LED4 |
| 1 | C8678 SS34 | SMA_L4.3-W2.6-LS5.2-RD | D2 |
| 1 | C3024223 SDT5A60SA-13 | SMA_Diodes_SDT5A60SA_C3024223 | D3 |
| 1 | C1334133 10uH | ASPI-0630LR_L7.5-W6.85 | L1 |
| 2 | C19268674 100uH | IND-SMD_L13.8-W12.8 | L2, L3 |
| 7 | C77102 10uF 50V X7R | C1210 | C3, C14, C20, C36, C37, C39, C46 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | C335982 470uF 10V | CAP-SMD_BD6.3-L6.6-W6.6-FD | C4, C22, C23 |
| 6 | C22387780 470uF 35V | CAP-SMD_BD10.0-L10.3-W10.3-LS11.0-FD | C5, C7, C12, C21, C24, C25 |
| 7 | C1711 100nF 50V | C0805 | C6, C8, C10, C17, C18, C19, C38 |
| 1 | C970687 100uF 50V | CAP-SMD_BD8.0-L8.3-W8.3-LS9.0-FD | C9 |
| 1 | C2983319 470uF 25V | CAP-SMD_BD8.0-L8.3-W8.3-LS9.0-FD | C11 |
| 2 | C1623 470nF | C0603 | C15, C16 |
| 2 | C1729 22nF | C0805 | C32, C33 |
| 3 | C136280 47uF 25V polymer | CAP-SMD_BD6.3-L6.6-W6.6-FD | C40, C41, C42 |
| 1 | C861679 158k 0.1% | R0603 | R1 |
| 1 | C95204 10k 0.1% | R0603 | R2 |
| 1 | C23159 4300R | R0603 | R3 |
| 1 | C21190 1k | R0603 | R4 |
| 1 | C861077 10500R | R0603 | R5 |
| 1 | C110776 1000R | R0603 | R6 |
| 3 | C17513 1k | R0805 | R7, R8, R9 |
| 2 | C861589 8200R 0.1% | R0603 | R20, R26 |
| 2 | C861519 680R 0.1% | R0603 | R21, R27 |
| 3 | C110776 1000R 0.1% | R0603 | R22, R25, R28 |
| 1 | C861371 3090R 0.1% | R0603 | R23 |
| 1 | C861332 33R 0.1% | R0603 | R24 |
Preview design files
The KiCad project lives in the Takazudo/zudo-pd repository on GitHub; these links point at the commit this page was built from.
Preview: common questions
How big is the Preview PCB?
The Preview measures 110 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Preview?
75 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Preview design files?
From the Takazudo/zudo-pd repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Preview design in my own project?
The repository has no license, so all rights stay with Takazudo. Use it as a reference, and ask the author before reusing the design.
