MSPM0 Starter
tanai-prathapam·lab3_445L_personal·hw/MSPM0_Starter/MSPM0_Starter.kicad_pcb
About the MSPM0 Starter PCB
MSPM0 Starter is an open source PCB design by tanai-prathapam, published on GitHub. It is a 2-layer board, with 21 components from 15 distinct parts.
Other key parts include the LP2950-33LPRE3 and M0G3507QDGS32RQ1. By type, the board carries 7 capacitors, 6 resistors, 3 test points, 2 ICs, 2 connectors and 1 switch.
From the project
For 319K/445L Lab 6 or 7, use the marked file. Otherwise use ECE445L_Starter.
Main components on the MSPM0 Starter
MSPM0 Starter bill of materials (BOM)
21 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LP2950-33LPRE3 | TO-92_Inline_Wide | IC2 |
| 1 | M0G3507QDGS32RQ1 | generic_VSSOP_0.5mm | U3 |
| 1 | Header2 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | UP | SW_PUSH_6mm | SW2 |
| 3 | TP | Testpoint_1x02_P2.54mm | TP1, TP2, TP3 |
| 2 | 4.7uF | CP_Radial_Tantal200mil | C1, C2 |
| 1 | 10nF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 10uF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C7 |
| 1 | 0.1uF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C8 |
| 1 | 0.47uF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C9 |
| 1 | 1uF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C12 |
| 3 | 0 | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | R4, R14, R16 |
| 1 | 47k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6 |
| 2 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R10 |
MSPM0 Starter design files
The KiCad project lives in the tanai-prathapam/lab3_445L_personal repository on GitHub; these links point at the commit this page was built from.
MSPM0 Starter: common questions
How big is the MSPM0 Starter PCB?
The MSPM0 Starter has 2 copper layers and is 1.6 mm thick.
How many components are on the MSPM0 Starter?
21 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the MSPM0 Starter design files?
From the tanai-prathapam/lab3_445L_personal repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MSPM0 Starter design in my own project?
The repository has no license, so all rights stay with tanai-prathapam. Use it as a reference, and ask the author before reusing the design.
More boards in lab3_445L_personal
Robotics System Learning Kit
tanai-prathapam
128.3 × 129.5 mm49 parts2LNo license0ECE 319K Baseline Project
tanai-prathapam
114.3 × 88.9 mm40 parts2LNo license0ECE445L Lab6
tanai-prathapam
114.4 × 88.9 mm28 parts2LNo license0ESP8266
ECE 445L Baseline Project
tanai-prathapam
115 × 94 mm16 parts2LNo license0ECE445L Lab3
tanai-prathapam
114.3 × 88.9 mm16 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0ECE445L Lab2
tanai-prathapam
114.3 × 88.9 mm12 parts2LNo license0ECE445L Lab1
tanai-prathapam
114.3 × 88.9 mm5 parts2LNo license0