18 open source boards using the LP2950-33LPRE3
Real designs built with the LP2950-33LPRE3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
ECE 445L Baseline Project
mjetpurwala
194.9 × 93 mm61 parts2LNo license0ESP32
PiezotesterV2.1
JakubJasiejko
119.3 × 97.4 mm49 parts2LMIT0ESP32
ECE445L Starter
Andres-Wearden
164.3 × 114.8 mm62 parts2LNo license0ECE 445L Lab 6
wtc534
114.4 × 88.9 mm28 parts2LNo license0ECE 445L Lab 6
Ethan-Hale
114.4 × 88.9 mm28 parts2LNo license0ECE 445L Lab 6
Joshua-Koshy
114.4 × 88.9 mm28 parts2LNo license0ECE 445L Lab 6
mjetpurwala
114.4 × 88.9 mm28 parts2LNo license0ECE 445L Lab 6
Siddhant779
114.4 × 88.9 mm28 parts2LNo license0ECE445L Lab6
tanai-prathapam
114.4 × 88.9 mm28 parts2LNo license0ECE445L Lab6
tanai-prathapam
114.4 × 88.9 mm28 parts2LNo license0ECE445L Lab6
tanai-prathapam
114.4 × 88.9 mm28 parts2LNo license0ECE445L Lab6
tanai-prathapam
114.4 × 88.9 mm28 parts2LNo license0ECE 445L Lab 6
DylanMeeks
114.4 × 88.9 mm28 parts2LNo license0ECE 445L Lab 6
Andres-Wearden
114.4 × 88.9 mm28 parts2LNo license0- schematic only · 21 parts
MSPM0 Starter
tanai-prathapam
21 parts2LNo license0 - schematic only · 21 parts
MSPM0 Starter
tanai-prathapam
21 parts2LNo license0 - schematic only · 21 parts
MSPM0 Starter
tanai-prathapam
21 parts2LNo license0 - schematic only · 21 parts
MSPM0 Starter
tanai-prathapam
21 parts2LNo license0
How designs wire the LP2950-33LPRE3
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the LP2950-33LPRE3 connects to, and the resistors, capacitors and other passives placed on it.
- The OUTPUT pin is tied to 3.3V on 11 of 12 designs.
- The INPUT pin is tied to 7V on 10 of 12 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTPUTpin 1 | Connected to: 3.3V 92% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| INPUTpin 3 | Connected to: 7V 83% · a signal 17% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ECE 445L Lab 6 by Andres-Wearden, ECE 445L Lab 6 by DylanMeeks, ECE 445L Lab 6 by Ethan-Hale and PiezotesterV2.1 by JakubJasiejko.
The LP2950-33LPRE3 in open source designs
The gallery holds 18 open source boards using the LP2950-33LPRE3 from 12 GitHub repositories; a typical one measures about 114.4 × 88.9 mm and carries around 28 components.
100% are two-layer designs, the rest use four layers or more, and 6% carry an open source license.
The most starred is ECE445L Starter by Andres-Wearden.
Parts used alongside the LP2950-33LPRE3
What boards using the LP2950-33LPRE3 are built for
LP2950-33LPRE3: common questions
Where can I find a LP2950-33LPRE3 reference design?
Each of the 18 boards on this page is a real design using the LP2950-33LPRE3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LP2950-33LPRE3 OUTPUT pin connected?
The OUTPUT pin is tied to 3.3V on 11 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the LP2950-33LPRE3.
How is the LP2950-33LPRE3 INPUT pin connected?
The INPUT pin is tied to 7V on 10 of 12 designs (a signal on 2). Counted from the KiCad layouts of 12 open source designs using the LP2950-33LPRE3.
What parts are used alongside the LP2950-33LPRE3?
The Adafruit ST7735R, TM4C123GH6PMIR, M0G3507QDGS32RQ1, LM4041CILPR and MCP34119P appear in the most repositories here.
Which microcontrollers do boards using the LP2950-33LPRE3 use?
Most are built on ESP32 (2) and ESP8266 (1).
How big is a typical board using the LP2950-33LPRE3?
The median is 114.4 × 88.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the LP2950-33LPRE3?
By GitHub stars, ECE445L Starter by Andres-Wearden, with 0 stars.
Can I simulate one of these boards using the LP2950-33LPRE3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.