2025Main
Team-Elite-2025·2025MainPCB
About the 2025Main PCB
2025Main is an open source NXP PCB design by Team-Elite-2025, published on GitHub. It is a 4-layer board measuring 108 × 101 mm, with 70 components from 27 distinct parts.
Its main chip is the Teensy4.1, from the NXP family. Other key parts include the VNH7070ASTR, V_Regulator3.3v, V_Regulator5v, BoostConverter and Compass. By type, the board carries 20 resistors, 14 connectors, 14 capacitors, 12 ICs, 6 switches and 4 modules.
Main components on the 2025Main
2025Main bill of materials (BOM)
70 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | VNH7070ASTR | SOIC127P600X175-16N | IC1, IC2, IC3, IC4 |
| 1 | V_Regulator3.3v | Pololu Regulator | U1 |
| 1 | V_Regulator5v | Pololu5V3.4A | U2 |
| 1 | BoostConverter | Boost_Convertor_LM2577 | U3 |
| 1 | V_Regulator5v | Pololu Regulator | U4 |
| 1 | Compass | Compass Sensor DFRobot | U5 |
| 2 | N channel | TO-220-3_Vertical | U6, U10 |
| 1 | Teensy4.1 | Teensy41 | U12 |
| 4 | Motor_DC | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | M1, M2, M3, M4 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | RaspberryPi | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J2 |
| 2 | Conn_01x02 | PinHeader_2x01_P2.54mm_Vertical | J3, J4 |
| 1 | Screw_Terminal_01x02 | AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | J5 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J6 |
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J7, J11 |
| 3 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J8, J9, J10 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J12 |
| 2 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J13, J14 |
| 2 | SW_DPST_x2 | SPDT_OS102011_CNK | SW1, SW6 |
| 4 | SW_SPDT | SPDT_OS102011_CNK | SW2, SW3, SW4, SW5 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10uf | C_0805_2012Metric | C1, C3, C6, C8, C10 |
| 5 | .1uf | C_0805_2012Metric | C2, C4, C5, C7, C9 |
| 4 | 0.1uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12, C13, C14 |
| 12 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R7, R8, R9, R10, R11, R12, R13 +4 |
| 6 | 10k | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R2, R3, R4, R5, R6, R18 |
| 1 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 1 | 1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
2025Main design files
The KiCad project lives in the Team-Elite-2025/2025MainPCB repository on GitHub; these links point at the commit this page was built from.
- LayoutMainPCB.kicad_pcb
- SchematicMainPCB.kicad_sch
2025Main: common questions
What microcontroller does the 2025Main use?
The 2025Main is built around the Teensy4.1, from the NXP family.
How big is the 2025Main PCB?
The 2025Main measures 108 × 101 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 2025Main?
70 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the 2025Main design files?
From the Team-Elite-2025/2025MainPCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 2025Main design in my own project?
The repository has no license, so all rights stay with Team-Elite-2025. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2025Main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532