Vectrex la tap
technobly·vectrex-la-tap·hardware/vectrex-la-tap.kicad_pcb
About the Vectrex la tap PCB
Vectrex la tap is an open source PCB design by technobly, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 48 × 96.1 mm, with 6 components from 6 distinct parts.
By type, the board carries 4 connectors and 1 capacitor.
It belongs with the test & measurement designs in this gallery.
From the project
A logic analyzer tap for the Vectrex
The Vectrex LA Tap is a logic analyzer tap for the Vectrex. It also turns the cartridge to face the player. Use it for technical debugging, or just as a way to display your running cartridge. Populate either the right-angle or straight male header for connections, or both. I prefer the right-angle to keep the jumpers lower to the table where your logic analyzer is located. This can also be used as a quick way to add RAM to a game if you don't have a multicart like VEXTREME that can do that for you programmatically.

Vectrex la tap bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | vectrex-edge-connector | vectrex-edge-connector-thinner-no-soldermask | CON1 |
| 1 | AMP-5645235-4 | AMP_5645235-4_2x18_P2.54mm_Vertical | J1 |
| 1 | Conn 2x18 Horizontal | PinHeader_2x18_P2.54mm_Horizontal | J2 |
| 1 | Conn 2x18 Vertical | PinHeader_2x18_P2.54mm_Vertical | J3 |
| 1 | LOGO | vectrex-us-silkscreen | G1 |
| 1 | 0.1uF 0805 | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
Vectrex la tap design files
The KiCad project lives in the technobly/vectrex-la-tap repository on GitHub; these links point at the commit this page was built from.
Vectrex la tap: common questions
How big is the Vectrex la tap PCB?
The Vectrex la tap measures 48 × 96.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vectrex la tap?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vectrex la tap design files?
From the technobly/vectrex-la-tap repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Vectrex la tap design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which technobly chose for the repository.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528