STM32H7

tejaswininagalingam·STM32H7

STM32H7 PCB layout, top view — open source STM32 board by tejaswininagalingam

About the STM32H7 PCB

STM32H7 is an open source STM32 PCB design by tejaswininagalingam, published on GitHub. It is a 2-layer board measuring 80 × 60.5 mm, with 14 components from 12 distinct parts.

Its main chip is the STM32H743VITx, from the STM32 family. Other key parts include the 3.3 and U2. By type, the board carries 3 ICs, 3 capacitors, 2 connectors, 1 switch, 1 diode and 1 resistor.

From the project

Design a high-performance embedded real-time control board based on an STM32H7 microcontroller, suitable for high-frequency control loops, deterministic outputs, precision sensing, and high-rate data logging.

Main components on the STM32H7

STM32H7 bill of materials (BOM)

14 components, 12 distinct parts.

QtyPartRefs
1
3.3
U1
1
U2
U2
1
STM32H743VITx
U3
1
Conn_01x02
J1
1
Conn_01x06
J2
1
10uH
5V_MAIN1
2
10k
R_BOOT1, R_RST1
1
SW_Push
SW1
1
D_Schottky
D1
1
10uF
C1
2
C
C2, C3
1
10R
R1

STM32H7 design files

The KiCad project lives in the tejaswininagalingam/STM32H7 repository on GitHub; these links point at the commit this page was built from.

STM32H7: common questions

What microcontroller does the STM32H7 use?

The STM32H7 is built around the STM32H743VITx, from the STM32 family.

How big is the STM32H7 PCB?

The STM32H7 measures 80 × 60.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32H7?

14 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32H7 design files?

From the tejaswininagalingam/STM32H7 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32H7 design in my own project?

The repository has no license, so all rights stay with tejaswininagalingam. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32H7 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards