HardLabs

Debug Adaptor for TekTag Biosensor

teklabsdigital·TekTag·electronics/pcb_debug/debug_board.kicad_pcb

Debug Adaptor for TekTag Biosensor PCB layout, top view — open source board by teklabsdigital

About the Debug Adaptor for TekTag Biosensor PCB

Debug Adaptor for TekTag Biosensor is an open source PCB design by teklabsdigital, published on GitHub under the MIT license. It is a 2-layer board measuring 48 × 37 mm, with 6 components from 6 distinct parts.

By type, the board carries 5 connectors and 1 jumper.

It belongs with the iot & wireless designs in this gallery.

From the project

Biosensor for telehealth, patient monitoring, fall detection, dementia geofencing and cardiograms

Introducing the latest open-source project from Teklabs Digital™, a sophisticated state-of-the-art IoT biosensor for patient monitoring, telehealth, pressure are management in hospitals, cardiac monitoring, fall detection and dementia geofencing. This community project, released under an open source license, showcases our commitment to pushing the boundaries of digital design innovation.

Debug Adaptor for TekTag Biosensor, from the project README
From the project README

Debug Adaptor for TekTag Biosensor bill of materials (BOM)

6 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SWD Trace
J1
1
SWD Trace J Trace
J2
1
SWD Debug
J3
1
5V
J4
1
GND
J5
1
5V Trace
JP1

Debug Adaptor for TekTag Biosensor design files

The KiCad project lives in the teklabsdigital/TekTag repository on GitHub; these links point at the commit this page was built from.

Debug Adaptor for TekTag Biosensor: common questions

How big is the Debug Adaptor for TekTag Biosensor PCB?

The Debug Adaptor for TekTag Biosensor measures 48 × 37 mm, has 2 copper layers and is 1 mm thick.

How many components are on the Debug Adaptor for TekTag Biosensor?

6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Debug Adaptor for TekTag Biosensor design files?

From the teklabsdigital/TekTag repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Debug Adaptor for TekTag Biosensor design in my own project?

Yes, under the terms of its MIT license, which teklabsdigital chose for the repository.

More boards in TekTag

Similar boards