30x30-ESC-Flashing
About the 30x30-ESC-Flashing PCB
30x30-ESC-Flashing is an open source PCB design by tetraethylmethane, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 12 components from 2 distinct parts.
By type, the board carries 8 test points and 4 connectors.
From the project
SWD flashing jig for the OpenESC-30x30 (../../OpenESC-30x30/hardware/4in1). Retargeted copy of OpenESC-20x20-Flashing: same 100 x 100 mm 4-layer layout, same pogo pins, headers, banana jacks and M3 pattern. Only the ten pogo pins moved, to the coordinates the 30x30 actually uses.
SWD flashing jig for the OpenESC-30x30 (../../OpenESC-30x30/hardware/4in1). Retargeted copy of OpenESC-20x20-Flashing: same 100 x 100 mm 4-layer layout, same pogo pins, headers, banana jacks and M3 pattern. Only the ten pogo pins moved, to the coordinates the 30x30 actually uses.
Ten 1.2 mm SMD pogo pins land on the ESC's B.Cu face, which is where the SWD test points are:
30x30-ESC-Flashing bill of materials (BOM)
12 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | SWD1 | HDR-TH_4P-P2.54-V-M | J1, J3, J5, J6 |
| 8 | YZ118311024R-02 | CONN-SMD_BD1.2_YZ118311024R-02 | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
30x30-ESC-Flashing design files
The KiCad project lives in the tetraethylmethane/NIDAR-RescueSwarm repository on GitHub; these links point at the commit this page was built from.
30x30-ESC-Flashing: common questions
How big is the 30x30-ESC-Flashing PCB?
The 30x30-ESC-Flashing measures 100 × 100 mm, has 4 copper layers and is 1.8754 mm thick.
How many components are on the 30x30-ESC-Flashing?
12 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 30x30-ESC-Flashing design files?
From the tetraethylmethane/NIDAR-RescueSwarm repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 30x30-ESC-Flashing design in my own project?
The repository has no license, so all rights stay with tetraethylmethane. Use it as a reference, and ask the author before reusing the design.
More boards in NIDAR-RescueSwarm
ESP32DrikrAIO
50 × 50 mm339 parts6LNo license1
4in1-panel
41.6 × 80.4 mm249 parts6LNo license1
ESP32OpenAIO
35 × 35 mm244 parts8LNo license1
4in1
41.6 × 42.5 mm187 parts6LNo license1
OpenFC
26.9 × 26.9 mm97 parts6LNo license1
ESP32OpenRX-Gemini
17 × 15.7 mm85 parts6LNo license1
ESP32OpenRX-Mono
10 × 17.3 mm61 parts6LNo license1
ESP32OpenRX-Lite-UFL
10 × 11.5 mm47 parts6LNo license1
20x20-ESC-Flashing
100 × 100 mm14 parts4LNo license1