WirelessGSE

tetsu26·WirelessGSE·PCB/GSEver2.kicad_pcb

WirelessGSE PCB layout, top view — open source NXP board by tetsu26

About the WirelessGSE PCB

WirelessGSE is an open source NXP PCB design by tetsu26, published on GitHub. It is a 2-layer board measuring 87.3 × 86 mm, with 23 components from 14 distinct parts.

Its main chip is the MBED-LPC1768, from the NXP family. By type, the board carries 6 connectors, 5 resistors, 4 transistors, 4 relays and 1 diode.

It belongs with the iot & wireless designs in this gallery.

From the project

無線GSEのコードとか

時は遡ること2017年,この年の能代で突然,点火点と射点の位置が20mくらい伸びたため,今まで使っていたGSEのケーブルの長さが足りなくなってしまったのです.そこで燃焼班の皆様はLANケーブルを調達し,なんか頑張ってどうにかなった(詳しくはよく知らん)のですが,そのときの燃焼班のケーブル半田付けなどがまぁそれはそれは残念だったので,電子班でどうにかしようということになりました.んで,当時流行だった無線GSEに憧れた7期はどうせならFTEのGSEも無線化しちまおうとなったわけです.自然な流れですね.そして当時電子班班長だった私は電子班の誰かに無線GSE開発を押しつけようと声をかけ続けた訳ですが,何かと理由をつけて全員に断られてしまったので仕方なく自分でやることにしたわけです.

そうして無線GSEを作ることになってしまった私ですが,当初はロケットの電装に比べれば,スイッチの状態を送信するだけなんで簡単だろうと高をくくっていた訳です.まぁ"スイッチの状態を送るだけなら"実際簡単な訳ですが.実際作ってみるといろいろな障壁がありました. * 送信レートの問題

WirelessGSE bill of materials (BOM)

23 components, 14 distinct parts.

QtyPartRefs
4
2SC1815
Q1, Q2, Q3, Q4
1
Fill
J1
1
Dump
J2
1
Oxy
J3
1
Fire
J4
1
Switches
J6
1
DC_IN
J7
1
IM920
IM1
4
946H-1C-5D
K1, K2, K3, K4
1
MBED-LPC1768
MBED LPC1768
1
BP5293-50
PS1
1
LED
D1
4
8.2k
R1, R2, R3, R4
1
1k
R5

WirelessGSE design files

The KiCad project lives in the tetsu26/WirelessGSE repository on GitHub; these links point at the commit this page was built from.

WirelessGSE: common questions

What microcontroller does the WirelessGSE use?

The WirelessGSE is built around the MBED-LPC1768, from the NXP family.

How big is the WirelessGSE PCB?

The WirelessGSE measures 87.3 × 86 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the WirelessGSE?

23 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the WirelessGSE design files?

From the tetsu26/WirelessGSE repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the WirelessGSE design in my own project?

The repository has no license, so all rights stay with tetsu26. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the WirelessGSE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards