LED-LIGHT-USB
TheBadZhang·LED-LIGHT-USB
About the LED-LIGHT-USB PCB
LED-LIGHT-USB is an open source PCB design by TheBadZhang, published on GitHub. It is a 2-layer board measuring 51.8 × 14.6 mm, with 22 components from 16 distinct parts.
Other key parts include the JL8022WJL, SY7200 and SY6280. By type, the board carries 6 resistors, 5 diodes, 5 capacitors, 3 ICs, 1 connector and 1 inductor.
From the project
通过USB供电的陶瓷灯丝触控灯
简而言之就是USB供电,通过一个限流保护开关,然后通过一个LED驱动芯片驱动4串LED,通过一个LED触摸控制芯片控制灯的亮度
焊接的时候需要注意LED的正负,我买的陶瓷灯丝LED上是有孔的一端为正,对应圆角矩形的一端为正,椭圆矩形的一端为负

Main components on the LED-LIGHT-USB
LED-LIGHT-USB bill of materials (BOM)
22 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | JL8022WJL | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | SY7200 | SOT-23-6 | U2 |
| 1 | SY6280 | SOT-23-5 | U3 |
| 1 | USB_A | USB_A_CNCTech_1001-011-01101_Horizontal | J2 |
| 1 | 符号 | 手指符号 | SYMBOL1 |
| 4 | LED | 陶瓷灯丝LED-26mm | D1, D2, D3, D4 |
| 1 | SS14 | D_SOD-123F | D5 |
| 1 | 10uH | L_Abracon_ASPI-3012S | L1 |
| 2 | 10uF | C_0603_1608Metric | C1, C4 |
| 1 | 100nF | C_0603_1608Metric | C2 |
| 1 | 10nF | C_0603_1608Metric | C3 |
| 1 | 4.7uF | C_0603_1608Metric | C5 |
| 3 | 10K | R_0603_1608Metric | R1, R3, R4 |
| 1 | 1K | R_0603_1608Metric | R2 |
| 1 | 2R | R_0603_1608Metric | R5 |
| 1 | 510R | R_0603_1608Metric | R6 |
LED-LIGHT-USB design files
The KiCad project lives in the TheBadZhang/LED-LIGHT-USB repository on GitHub; these links point at the commit this page was built from.
- Layoutmain.kicad_pcb
- Schematicmain.kicad_sch
LED-LIGHT-USB: common questions
How big is the LED-LIGHT-USB PCB?
The LED-LIGHT-USB measures 51.8 × 14.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LED-LIGHT-USB?
22 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the LED-LIGHT-USB design files?
From the TheBadZhang/LED-LIGHT-USB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LED-LIGHT-USB design in my own project?
The repository has no license, so all rights stay with TheBadZhang. Use it as a reference, and ask the author before reusing the design.