Nebula Dock
Thecactusman0·Nebula-openwatch·Nebula - Master/Kicad/Nebula_Dock/Nebula_Dock.kicad_pcb
About the Nebula Dock PCB
Nebula Dock is an open source PCB design by Thecactusman0, published on GitHub. It is a 2-layer board measuring 40 × 40 mm, with 11 components from 7 distinct parts.
Other key parts include the FT232RL. By type, the board carries 5 resistors, 2 connectors, 2 capacitors, 1 IC and 1 fuse.
It belongs with the audio, wearables and sensors designs in this gallery.
From the project
Nebula is a ESP32 based smartwatch that features a rotating bezel encoder
-ESP32-S3-MINI with wifi and bluetooth LE capabilities
-I2C Ambient light sensor for automatic screen dimming
-Onboard ldo regulator with voltage supervisor
-I2S amplifier for audio output (BLUETOOTH LE DOES NOT SUPPORT STREAMING AUDIO,CHANGES ARE NEEDED TO BOARD TO ENABLE USE OF THIS CHIP)
-I2S Mems microphone for audio input(BLUETOOTH LE DOES NOT SUPPORT STREAMING AUDIO)
Main components on the Nebula Dock
Nebula Dock bill of materials (BOM)
11 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | Male_watch_connector | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | Polyfuse | Fuse_0603_1608Metric | F1 |
| 2 | 0.1uF | C_0402_1005Metric | C1, C2 |
| 2 | 5.1K | R_0402_1005Metric | R1, R2 |
| 3 | 270R | R_0402_1005Metric | R3, R4, R5 |
Nebula Dock design files
The KiCad project lives in the Thecactusman0/Nebula-openwatch repository on GitHub; these links point at the commit this page was built from.
Nebula Dock: common questions
How big is the Nebula Dock PCB?
The Nebula Dock measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nebula Dock?
11 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nebula Dock design files?
From the Thecactusman0/Nebula-openwatch repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nebula Dock design in my own project?
The repository has no license, so all rights stay with Thecactusman0. Use it as a reference, and ask the author before reusing the design.
More boards in Nebula-openwatch
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkDriver
scottbez1
198.1 × 30.5 mm58 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k