Valve Wizard Cab Sim
therealdjryan·Valve-Wizard-Cab-Sim
About the Valve Wizard Cab Sim PCB
Valve Wizard Cab Sim is an open source PCB design by therealdjryan, published on GitHub. It is a 2-layer board measuring 89.8 × 70.8 mm, with 50 components from 39 distinct parts.
Other key parts include the TL072. By type, the board carries 18 resistors, 14 capacitors, 8 connectors, 5 diodes, 2 transistors and 1 IC.
From the project
http://valvewizard.co.uk/cabsim.html
Main components on the Valve Wizard Cab Sim
Valve Wizard Cab Sim bill of materials (BOM)
50 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 | SOIC_DIP-8 | U1 |
| 1 | BC846BPN | SOT-363_SC-70-6 | Q2 |
| 1 | MMBF170 | SOT-23 | Q3 |
| 1 | IN | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | FS_EF | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Power | BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | Battery | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | FS | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | GND | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | IN | Jack_6.35mm_Neutrik_NMJ6HC-S_SOLDER_LUG | J10 |
| 1 | OUT | Jack_6.35mm_Neutrik_NMJ6HC-S_SOLDER_LUG | J11 |
| 1 | 100KB | Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1 |
| 1 | 100KA | Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV2 |
| 1 | 1n4001 | D_SMA | D1 |
| 3 | 1n4148 | D_SOD-123 | D2, D4, D5 |
| 1 | LED | LED_D3.0mm_FlatTop | D3 |
| 2 | 470u | CP_Radial_D10.0mm_P5.00mm | C1, C11 |
| 2 | 47u | CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C2, C10 |
| 1 | 2n2 | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C3 |
| 1 | 1n | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C4 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22n | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C5, C6 |
| 1 | 470n | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C7 |
| 1 | 220p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 330n | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C9 |
| 1 | 1u | C_Rect_L7.2mm_W8.5mm_P5.00mm_FKP2_FKP2_MKS2_MKP2 | C12 |
| 1 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 100n | C_0603_1608Metric | C14 |
| 2 | 10R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R16 |
| 2 | 100K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3 |
| 2 | 1M | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R6 |
| 2 | 1K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R11 |
| 3 | 10K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R10, R17 |
| 1 | 22K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 180K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 47K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | 330R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13 |
| 1 | 33K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14 |
| 1 | 220R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | 4K7 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18 |
Valve Wizard Cab Sim design files
The KiCad project lives in the therealdjryan/Valve-Wizard-Cab-Sim repository on GitHub; these links point at the commit this page was built from.
- LayoutValve Wizard Cab Sim.kicad_pcb
- SchematicValve Wizard Cab Sim.kicad_sch
Valve Wizard Cab Sim: common questions
How big is the Valve Wizard Cab Sim PCB?
The Valve Wizard Cab Sim measures 89.8 × 70.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Valve Wizard Cab Sim?
50 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the Valve Wizard Cab Sim design files?
From the therealdjryan/Valve-Wizard-Cab-Sim repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Valve Wizard Cab Sim design in my own project?
The repository has no license, so all rights stay with therealdjryan. Use it as a reference, and ask the author before reusing the design.