STM32-Based-Blue-Tooth-Hardware
TheRealHugoQuan·STM32-Based-Blue-Tooth-Hardware-PCB
About the STM32-Based-Blue-Tooth-Hardware PCB
STM32-Based-Blue-Tooth-Hardware is an open source STM32 PCB design by TheRealHugoQuan, published on GitHub. It is a 4-layer board measuring 58.9 × 25.8 mm, with 40 components from 21 distinct parts.
Its main chip is the STM32WB55CEU6, from the STM32 family. Other key parts include the USBLC6-2SC6(ESD) and MIC5365-3.3YD5. By type, the board carries 19 capacitors, 7 resistors, 3 ICs, 3 connectors, 3 inductors and 2 crystals.
It belongs with the iot & wireless and rf & radio designs in this gallery.
From the project
This is a repository for a STM32-based hardware PCB
Designed specifically for [e.g., low-power IoT applications / wearable prototyping], this board integrates a high-performance ARM Cortex-M core with a 2.4GHz RF radio, optimized power routing, and exposed peripheral headers for rapid sensor integration.
Main components on the STM32-Based-Blue-Tooth-Hardware
STM32-Based-Blue-Tooth-Hardware bill of materials (BOM)
40 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32WB55CEU6 STMicroelectronics | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | USBLC6-2SC6(ESD) STMicroelectronics | SOT-23-6 | U2 |
| 1 | MIC5365-3.3YD5 Microchip | TSOT-23-5 | U3 |
| 1 | 32MHz NDK | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 32kHz768 NDK | Crystal_SMD_2012-2Pin_2.0x1.2mm | Y2 |
| 1 | Conn_Coaxial Hirose | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P GCT | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | Conn_01x04_Pin Molex | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J4 |
| 1 | SW_Push C&K | SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | DLF162500LT-5028A1 TDK | Untitled | FLT1 |
| 1 | LED Wurth Elektronik | LED_0402_1005Metric | D1 |
| 1 | 10u Murata | L_0805_2012Metric | L1 |
| 1 | 10n Murata | L_0402_1005Metric | L2 |
| 1 | 2n7 Murata | L_0402_1005Metric | L3 |
| 5 | 4u7 KYOCERA AVX | C_0603_1608Metric | C1, C7, C10, C17, C18 |
| 10 | 100n KYOCERA AVX | C_0402_1005Metric | C2, C3, C4, C5, C6, C8, C9, C15 +2 |
| 2 | C KYOCERA AVX | C_0402_1005Metric | C11, C12 |
| 1 | 0p8 Murata | C_0402_1005Metric | C13 |
| 1 | 0p3 Murata | C_0402_1005Metric | C14 |
| 3 | 5k1 Yageo | R_0402_1005Metric | R1, R3, R4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 220R Yageo | R_0402_1005Metric | R2, R5, R6, R7 |
STM32-Based-Blue-Tooth-Hardware design files
The KiCad project lives in the TheRealHugoQuan/STM32-Based-Blue-Tooth-Hardware-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutSTM32BLEHardware.kicad_pcb
- SchematicSTM32BLEHardware.kicad_sch
STM32-Based-Blue-Tooth-Hardware: common questions
What microcontroller does the STM32-Based-Blue-Tooth-Hardware use?
The STM32-Based-Blue-Tooth-Hardware is built around the STM32WB55CEU6, from the STM32 family.
How big is the STM32-Based-Blue-Tooth-Hardware PCB?
The STM32-Based-Blue-Tooth-Hardware measures 58.9 × 25.8 mm, has 4 copper layers and is 1.4755 mm thick.
How many components are on the STM32-Based-Blue-Tooth-Hardware?
40 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32-Based-Blue-Tooth-Hardware design files?
From the TheRealHugoQuan/STM32-Based-Blue-Tooth-Hardware-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32-Based-Blue-Tooth-Hardware design in my own project?
The repository has no license, so all rights stay with TheRealHugoQuan. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32-Based-Blue-Tooth-Hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k