15 open source boards using the STM32WB55CEU6

Real designs built with the STM32WB55CEU6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the STM32WB55CEU6

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the STM32WB55CEU6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 14 of 14 designs, most often 100 nF (then 4.7 µF).
  • The PC14 pin has a capacitor to GND on 14 of 14 designs, most often 10 pF (then 15 pF).
  • The PC14 pin has a crystal on 14 of 14 designs, most often 32.768 kHz.
  • The PH3 pin has a resistor to GND on 14 of 14 designs, most often 5.1 kΩ (then 10 kΩ).
VBATpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (44), 4.7 µF (12)
PC14pin 2Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 pF (11), 15 pF (1)
  • Crystal on 100% · 32.768 kHz (2)
PC15pin 3Connected to: Signal 100%
  • Capacitor to GND on 86% · 10 pF (10), 15 pF (1)
  • Crystal on 86% · 32.768 kHz (2)
PH3pin 4Connected to: Signal 100%
  • Resistor to GND on 100% · 5.1 kΩ (9), 10 kΩ (2), 1 kΩ (1)
  • Series resistor on 100% · 220 Ω (6), 100 Ω (3), 200 Ω (1)
  • Capacitor to GND on 100% · 100 nF (12), 4.7 µF (1)
PB8pin 5Connected to: Not connected 93%
PB9pin 6Connected to: Not connected 93%
NRSTpin 7Connected to: A connector 86%
  • Capacitor to GND on 100% · 100 nF (12), 4.7 µF (1)
VDDApin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (34), 4.7 µF (3)
PA0pin 9Connected to: Not connected 93%
PA1pin 10Connected to: Not connected 93%
PA2pin 11Connected to: Signal 86%
  • Series resistor on 86% · 220 Ω (7), 100 Ω (2), 200 Ω (1)
PA3pin 12Connected to: Signal 100%
  • Series resistor on 93% · 220 Ω (8), 100 Ω (2), 200 Ω (1)
PA4pin 13Connected to: Not connected 86%
PA5pin 14Connected to: Not connected 86%
PA6pin 15Connected to: Not connected 86%
PA8pin 17Connected to: Not connected 86%
PA9pin 18Connected to: Not connected 93%
PB2pin 19Connected to: Not connected 93%
VDDpin 20, 35, 48Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (110), 4.7 µF (27), 100 pF (2)
RF1pin 21Connected to: Signal 100%
  • Capacitor to GND on 100% · 8 e-13F (11), 3 e-13F (1)
  • Inductor on 100% · 2.7 nH (13)
VSSRFpin 22Connected to: GND 100%
VDDRFpin 23Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (29), 100 pF (2), 4.7 µF (1)
OSC_OUTpin 24Connected to: Signal 100%
  • Crystal on 86% · 32 MHz (10)
OSC_INpin 25Connected to: Signal 100%
  • Crystal on 100% · 32 MHz (11)
AT0pin 26Connected to: Not connected 100%
AT1pin 27Connected to: Not connected 100%
PB0pin 28Connected to: Not connected 93%
PB1pin 29Connected to: Not connected 93%
PE4pin 30Connected to: Not connected 100%
VFBSMPSpin 31Connected to: Signal 100%
  • Capacitor to GND on 100% · 4.7 µF (13)
  • Inductor on 100% · 10 µH (13)
VSSSMPSpin 32Connected to: GND 100%
VLXSMPSpin 33Connected to: Signal 100%
  • Inductor on 100% · 10 nH (13), 10 µH (1)
VDDSMPSpin 34Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (37), 4.7 µF (14)
PA10pin 36Connected to: Not connected 93%
VDDUSBpin 40Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (56), 4.7 µF (9)
PA15pin 42Connected to: Not connected 93%
PB4pin 44Connected to: Not connected 93%
PB5pin 45Connected to: Not connected 86%
PB6pin 46Connected to: Not connected 86%
PB7pin 47Connected to: Not connected 79% · a signal 21%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32 RF Demo PCB by Venky474, Stm32-bt board by OdaiJ, Bluephil STM32WB555 by Chockalingam-M and ECE5780-Project by DinaliAssylbek.

The STM32WB55CEU6 in open source designs

The gallery holds 15 open source boards using the STM32WB55CEU6 from 14 GitHub repositories; a typical one measures about 49 × 27.7 mm and carries around 43 components.

100% use four copper layers or more, and 27% carry an open source license.

The most starred is STM32 RF Demo PCB by Venky474.

Parts used alongside the STM32WB55CEU6

Microcontrollers on boards using the STM32WB55CEU6

STM32WB55CEU6: common questions

Where can I find a STM32WB55CEU6 reference design?

Each of the 15 boards on this page is a real design using the STM32WB55CEU6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32WB55CEU6 VBAT pin?

The VBAT pin has a decoupling capacitor on 14 of 14 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 14 open source designs using the STM32WB55CEU6.

How is the STM32WB55CEU6 PC14 pin connected?

The PC14 pin has a capacitor to GND on 14 of 14 designs, most often 10 pF (then 15 pF). Counted from the KiCad layouts of 14 open source designs using the STM32WB55CEU6.

What resistor goes on the STM32WB55CEU6 PH3 pin?

The PH3 pin has a resistor to GND on 14 of 14 designs, most often 5.1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 14 open source designs using the STM32WB55CEU6.

What parts are used alongside the STM32WB55CEU6?

The USBLC6-2SC6, MIC5365-3.3YD5 and MIC5365-3.3YD5-TR appear in the most repositories here.

Which microcontrollers do boards using the STM32WB55CEU6 use?

Most are built on STM32 (15).

How big is a typical board using the STM32WB55CEU6?

The median is 49 × 27.7 mm, and 0% are two-layer designs.

What is the most popular open source board using the STM32WB55CEU6?

By GitHub stars, STM32 RF Demo PCB by Venky474, with 2 stars.

Can I simulate one of these boards using the STM32WB55CEU6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part