Psa backplane
thewonderidiot·cdu·boards/psa_backplane/psa_backplane.kicad_pcb
About the Psa backplane PCB
Psa backplane is an open source PCB design by thewonderidiot, published on GitHub under the MIT license. It is a 4-layer board measuring 177.8 × 182.9 mm, with 12 components from 6 distinct parts.
By type, the board carries 8 modules and 4 connectors.
From the project
Tools for reverse-engineering, simulating, and interfacing with the Coupling Data Unit (CDU), one of Apollo's most infamous boxes
This repository contains documentation for, simulations of, and boards for powering and interfacing with the Coupling Data Unit (CDU) from Apollo spacecraft. The CDU performed most analog-to-digital and digital-to-analog conversions for the Apollo Guidance Computer, including resolver-to-digital conversions for the IMU, Command Module optics, and Lunar Module Rendezvous Radar. A breakdown in these conversions was the cause of the 1201 and 1202 program alarms during the Apollo 11 landing. The goal of this project is to replicate that condition on an original CDU, and explain exactly what…
Psa backplane bill of materials (BOM)
12 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | Conn_02x15_Top_Bottom | PSA_Module | A1, A2, A3, A4, A5, A6 |
| 2 | Conn_01x09 | PSA_Amp | A7, A8 |
| 1 | Conn_01x01 | Banana_Cliff_FCR7350R_S16N-PC_Horizontal | J1 |
| 1 | Conn_01x01 | Banana_Cliff_FCR7350B_S16N-PC_Horizontal | J2 |
| 1 | Conn_02x13_Top_Bottom | HARTING_HD26_RA | J3 |
| 1 | Conn_02x22_Top_Bottom | HARTING_HD44_RA | J4 |
Psa backplane design files
The KiCad project lives in the thewonderidiot/cdu repository on GitHub; these links point at the commit this page was built from.
Psa backplane: common questions
How big is the Psa backplane PCB?
The Psa backplane measures 177.8 × 182.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Psa backplane?
12 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Psa backplane design files?
From the thewonderidiot/cdu repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Psa backplane design in my own project?
Yes, under the terms of its MIT license, which thewonderidiot chose for the repository.
More boards in cdu
Agc
thewonderidiot
158.8 × 121.9 mm190 parts4LMIT1Aac
thewonderidiot
82.6 × 40.1 mm75 parts2LMIT1Aux relays
thewonderidiot
82.6 × 40.1 mm44 parts2LMIT1Connector
thewonderidiot
135.9 × 179.4 mm25 parts4LMIT1Lm switching
thewonderidiot
82.6 × 40.1 mm13 parts2LMIT1Fine ref
thewonderidiot
82.6 × 40.1 mm11 parts2LMIT1Resolver adapter
thewonderidiot
56.6 × 48.3 mm10 parts2LMIT1