Agc
thewonderidiot·cdu·boards/agc/agc.kicad_pcb
About the Agc PCB
Agc is an open source PCB design by thewonderidiot, published on GitHub under the MIT license. It is a 4-layer board measuring 158.8 × 121.9 mm, with 190 components from 20 distinct parts.
Other key parts include the LM317L_SO8. By type, the board carries 99 resistors, 26 transformers, 24 transistors, 16 diodes, 16 capacitors and 4 connectors.
From the project
Tools for reverse-engineering, simulating, and interfacing with the Coupling Data Unit (CDU), one of Apollo's most infamous boxes
This repository contains documentation for, simulations of, and boards for powering and interfacing with the Coupling Data Unit (CDU) from Apollo spacecraft. The CDU performed most analog-to-digital and digital-to-analog conversions for the Apollo Guidance Computer, including resolver-to-digital conversions for the IMU, Command Module optics, and Lunar Module Rendezvous Radar. A breakdown in these conversions was the cause of the 1201 and 1202 program alarms during the Apollo 11 landing. The goal of this project is to replicate that condition on an original CDU, and explain exactly what…
Main components on the Agc
Agc bill of materials (BOM)
190 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317L_SO8 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 24 | MMBT2222 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +16 |
| 1 | Conn_02x31_Top_Bottom | HARTING_HD62_RA | J1 |
| 2 | PPPC241LFBN-RC Conn_01x24 Sullins Connector Solutions | PinSocket_1x24_P2.54mm_Vertical | J2, J4 |
| 1 | Conn_02x13_Top_Bottom | HARTING_HD26_RA | J3 |
| 26 | 2:1 | Vigortronix_VTX-111 | T1, T2, T3, T4, T5, T6, T7, T8 +18 |
| 16 | 1N4148 | D_SOD-323 | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 4 | 100uH | API_Delevan_1812R | L1, L2, L3, L4 |
| 14 | 6.8uF | CP_EIA-7343-31_Kemet-D | C1, C2, C3, C4, C5, C6, C7, C8 +6 |
| 1 | 0.1uF | C_0603_1608Metric | C14 |
| 1 | 1uF | C_0603_1608Metric | C15 |
| 43 | 2000 | R_0603_1608Metric | R1, R3, R5, R7, R14, R16, R17, R18 +35 |
| 10 | 20k | R_0603_1608Metric | R2, R4, R6, R8, R15, R50, R60, R66 +2 |
| 10 | 51 | R_0603_1608Metric | R9, R10, R11, R12, R13, R24, R25, R26 +2 |
| 16 | 200 | R_0603_1608Metric | R35, R36, R37, R38, R51, R52, R53, R54 +8 |
| 16 | 1000 | R_0603_1608Metric | R39, R40, R41, R42, R55, R56, R57, R58 +8 |
| 1 | 5100 | R_0603_1608Metric | R89 |
| 1 | 500 | R_0603_1608Metric | R90 |
| 1 | 30k | R_0603_1608Metric | R97 |
| 1 | 13k | R_0603_1608Metric | R98 |
Agc design files
The KiCad project lives in the thewonderidiot/cdu repository on GitHub; these links point at the commit this page was built from.
- Layoutboards/agc/agc.kicad_pcb
- Schematicboards/agc/agc.kicad_sch
Agc: common questions
How big is the Agc PCB?
The Agc measures 158.8 × 121.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Agc?
190 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Agc design files?
From the thewonderidiot/cdu repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Agc design in my own project?
Yes, under the terms of its MIT license, which thewonderidiot chose for the repository.
More boards in cdu
Aac
thewonderidiot
82.6 × 40.1 mm75 parts2LMIT1Aux relays
thewonderidiot
82.6 × 40.1 mm44 parts2LMIT1Connector
thewonderidiot
135.9 × 179.4 mm25 parts4LMIT1Lm switching
thewonderidiot
82.6 × 40.1 mm13 parts2LMIT1Psa backplane
thewonderidiot
177.8 × 182.9 mm12 parts4LMIT1Fine ref
thewonderidiot
82.6 × 40.1 mm11 parts2LMIT1Resolver adapter
thewonderidiot
56.6 × 48.3 mm10 parts2LMIT1