IN-24V
Thierry-oshw·Allumettes·IN_24V/IN-24V.kicad_pcb
About the IN-24V PCB
IN-24V is an open source PCB design by Thierry-oshw, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 10 × 50.8 mm, with 6 components from 5 distinct parts.
Other key parts include the LTV-817S-TA1-C. By type, the board carries 5 resistors and 1 IC.
From the project
module 5mm x 34mm de fonction unitaire
Main components on the IN-24V
IN-24V bill of materials (BOM)
6 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTV-817S-TA1-C | SMDIP-4_W9.53mm | U2 |
| 1 | 100K 1k | R_0603_1608Metric | R1 |
| 1 | 10k | R_0603_1608Metric | R2 |
| 2 | 2k2 | R_0603_1608Metric | R3, R4 |
| 1 | 2K2 100k | R_0603_1608Metric | R5 |
IN-24V design files
The KiCad project lives in the Thierry-oshw/Allumettes repository on GitHub; these links point at the commit this page was built from.
IN-24V: common questions
How big is the IN-24V PCB?
The IN-24V measures 10 × 50.8 mm, has 2 copper layers and is 1.62 mm thick.
How many components are on the IN-24V?
6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IN-24V design files?
From the Thierry-oshw/Allumettes repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IN-24V design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which Thierry-oshw chose for the repository.
More boards in Allumettes
Panneau
Thierry-oshw
71 × 89 mm154 parts2LCERN-OHL-P-2.00DCDC 5V
Thierry-oshw
10 × 38.1 mm22 parts2LCERN-OHL-P-2.00OSC 1
Thierry-oshw
10 × 48.3 mm13 parts2LCERN-OHL-P-2.00XCAN
Thierry-oshw
10 × 38.1 mm12 parts2LCERN-OHL-P-2.00BIDIR-5V
Thierry-oshw
10 × 48.3 mm8 parts2LCERN-OHL-P-2.00IN-ANA
Thierry-oshw
5 × 34 mm8 parts2LCERN-OHL-P-2.00OUT TORM
Thierry-oshw
5 × 34 mm4 parts2LCERN-OHL-P-2.00