HardLabs

ShieldArduino Semaforo

tidus747·Proyectos_KiCAD·ShieldArduino_Semaforo/ShieldArduino_Semaforo.kicad_pcb

ShieldArduino Semaforo PCB layout, top view — open source AVR/Arduino board by tidus747

About the ShieldArduino Semaforo PCB

ShieldArduino Semaforo is an open source AVR/Arduino PCB design by tidus747, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 19 components from 9 distinct parts.

Its main chip is the Arduino_1pin, from the AVR/Arduino family. By type, the board carries 8 connectors, 5 diodes, 5 resistors and 1 switch.

From the project

Proyectos realizados en KiCAD a modo de tutoriales en Piensa 3D (https://www.youtube.com/channel/UC0-azsu5e8CxZfTl9mmafww)

En este repositorio se almacenarán todos los proyectos para KiCAD desarrollados en Piensa 3D. Puedes encontrar todo lo necesario dentro de las carpetas con el nombre de cada uno de los proyectos. Recuerda que en si quieres subir tu proyecto a este repositorio no tienes más que enviar un mail a piensa3d.dudas@gmail.com.

Las herramientas utilizadas durante el desarrollo de los tutoriales han sido las siguientes:

ShieldArduino Semaforo, from the project README
From the project README

ShieldArduino Semaforo bill of materials (BOM)

19 components, 9 distinct parts.

QtyPartRefs
1
Power
P1
1
Analog
P2
1
Digital
P3
1
Digital
P4
4
CONN_01X01
P5, P6, P7, P8
1
SW_Push
SW1
3
LED
D1, D2, D3
2
LED
D4, D5
5
R
R1, R2, R3, R4, R5

ShieldArduino Semaforo design files

The KiCad project lives in the tidus747/Proyectos_KiCAD repository on GitHub; these links point at the commit this page was built from.

ShieldArduino Semaforo: common questions

What microcontroller does the ShieldArduino Semaforo use?

The ShieldArduino Semaforo is built around the Arduino_1pin, from the AVR/Arduino family.

How big is the ShieldArduino Semaforo PCB?

The ShieldArduino Semaforo measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ShieldArduino Semaforo?

19 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the ShieldArduino Semaforo design files?

From the tidus747/Proyectos_KiCAD repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ShieldArduino Semaforo design in my own project?

Yes, under the terms of its GPL-3.0 license, which tidus747 chose for the repository.

Can I test firmware for the ShieldArduino Semaforo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Proyectos_KiCAD

Similar boards