PowerDeliveryModule V2
tigmit·Split-Numpad·Power_Delivery_Module_V2/PowerDeliveryModule_V2/PowerDeliveryModule_V2.kicad_pcb
About the PowerDeliveryModule V2 PCB
PowerDeliveryModule V2 is an open source PCB design by tigmit, published on GitHub. It is a 2-layer board measuring 71.6 × 33 mm, with 17 components from 13 distinct parts.
Other key parts include the SK12D07VG4 and AMS1117-3.3. By type, the board carries 5 capacitors, 4 resistors, 3 ICs, 3 connectors and 1 battery holder.
Main components on the PowerDeliveryModule V2
PowerDeliveryModule V2 bill of materials (BOM)
17 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | TP4056-18650 | U1 |
| 1 | SK12D07VG4 | SK12D07VG4 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | OUTPUT1 output1 | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | OUTPUT2 output2 | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | OUTPUT3 output3 | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Battery_Cell | battery solder pins | BT1 |
| 1 | ~ | DCDC-Converter | DCDC1 |
| 3 | 100UF 100uF | CP_EIA-3528-12_Kemet-T | C1, C3, C5 |
| 2 | 22UF 22uF | CP_EIA-3528-12_Kemet-T | C2, C4 |
| 2 | 100K 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3 |
| 1 | 4K7 4k7 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
PowerDeliveryModule V2 design files
The KiCad project lives in the tigmit/Split-Numpad repository on GitHub; these links point at the commit this page was built from.
PowerDeliveryModule V2: common questions
How big is the PowerDeliveryModule V2 PCB?
The PowerDeliveryModule V2 measures 71.6 × 33 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PowerDeliveryModule V2?
17 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PowerDeliveryModule V2 design files?
From the tigmit/Split-Numpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PowerDeliveryModule V2 design in my own project?
The repository has no license, so all rights stay with tigmit. Use it as a reference, and ask the author before reusing the design.